User manual GIGABYTE Q2440

[. . . ] Sony does not support third party applications. If you are having problems with a third party application, please contact the publisher of that application. 3 Making a backup of the data or applications on your CLIÉ handheld Sony recommends that you make a backup of your data in case of unexpected problems. Backing up your data will ensure that it can be restored again on your CLIÉ handheld, even if you have to perform a hard reset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Making a backup using Memory Stick Backup Use "Memory Stick" media and Memory Stick Backup on your CLIÉ handheld to back up data and applications on your CLIÉ handheld. b "Memory Stick" media (sold separately) is required. For details, refer to "Backing up your CLIÉTM handheld data and applications: Backing up data and applications to "Memory Stick" media using Memory Stick Backup" in "Handbook" (PDF format). Making a backup using the HotSync® operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Data or applications on your CLIÉ handheld is backed up to your computer when the HotSync® operation is performed. If you need to perform a hard reset, this would erase all user data and applications stored on your CLIÉ handheld. [. . . ] B Quit all applications other than PalmTM Desktop for CLIÉ. If you cannot perform the HotSync® operation even after following the above instructions, perform a soft reset by pressing the RESET button at the back of your CLIÉ handheld. b For details, refer to "Basic operations of your CLIÉTM handheld: Restarting your CLIÉTM handheld" in the supplied "Read This First (Operating Instructions)". Troubleshooting For particular problems regarding the HotSync® operations, refer to the following. I cannot start the HotSync® operation by tapping (HotSync) on the HotSync screen B Ensure [Local] and [Cradle/Cable] are selected in the HotSync screen. B Perform a soft reset by pressing the RESET button at the back of your CLIÉ handheld. b For details, refer to "Basic operations of your CLIÉTM handheld: Restarting your CLIÉTM handheld" in the supplied "Read This First (Operating Instructions)". Continued on next page ···················· 19 I cannot cancel the HotSync® operation midway B You may not be able to stop the HotSync® operation by tapping [Cancel] for over ten seconds after you start the USB HotSync® operation. B If you disconnect your CLIÉ handheld and computer during the HotSync® operation, the HotSync® operation may not perform correctly. b For details, refer to "Basic operations of your CLIÉTM handheld: Restarting your CLIÉTM handheld" in the supplied "Read This First (Operating Instructions)". B If you cannot stop the HotSync® operation even by tapping [Cancel], perform a soft reset. b For details, refer to "Basic operations of your CLIÉTM handheld: Restarting your CLIÉTM handheld" in the supplied "Read This First (Operating Instructions)". It takes a long time to complete the HotSync® operation B Depending on the application you are using, it may require time to complete the HotSync® operation because of large data/file sizes. Data cannot be synchronized with some applications when the HotSync® operation is performed B Does the user name for PalmTM Desktop for CLIÉ match the one for your CLIÉ handheld?In PalmTM Desktop for CLIÉ, select the user name corresponding to your CLIÉ handheld user name. B Is the application set not to synchronize files?Click (HotSync) in the task tray (Notification area) at the bottom right of your computer window and select [Custom. . . ] from the shortcut menu. If that device does not work, check the BIOS setting of your computer. In addition, check the setting in the Device Manager: Right-click [My Computer] and select [Properties] from the menu. (If you are using Windows 2000 Professional/Windows XP, click [Hardware]. ) Click [Device Manager] and check that [USB controller] is displayed in the Device Manager window. If USB controller is not displayed b For details, refer to the manual of your computer. I cannot perform the HotSync® operation via a modem Verifying your CLIÉ handheld B Check that you enter the correct phone number for the access point. B If you use a call waiting feature on your service line, select [Disable call waiting:] to enter the correct number in the Phone Setup screen which is displayed by tapping the box next to [Phone:] in [Network] of the Preferences screen. Continued on next page ···················· 23 I cannot perform the HotSync® operation via a modem (continued) B If a prefix is required, select [Dial prefix:] to enter the correct number in the Phone Setup screen. B When using a modem other than a mobile communicaton adapter, check the battery power of the modem. Verifying your computer B Check that your computer is turned on and the automatic shut-off setting in the power saving mode is disabled. B Check that the modem is properly connected to the service line. B Click (HotSync) in the task tray (Notification area) at the bottom right of your computer window, and check that [Modem] is selected. B Check that the modem connected to your computer is turned on. You cannot turn on a modem that has an Auto-off feature with your CLIÉ handheld. B Check that the modem is properly connected to the serial port of your computer. [. . . ] However, if you cannot locate the directory with some applications on your CLIÉ handheld, copy the data/files from "Memory Stick" media to your CLIÉ handheld using CLIE Files. b For details on reference directory of each application on "Memory Stick" media, refer to "About files stored on "Memory Stick" media" in "CLIÉ Application Manual" (HTML format). For any third party application, contact the developer of the software. Use Data Import/Data Export to install data/files from your computer to "Memory Stick" media. B When attribution of files or directories on "Memory Stick" media is selected as [Hidden], they cannot be displayed in CLIE Files. 31 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I cannot transfer data I cannot transfer image files from my computer to my CLIÉ handheld B Use Image Converter to transfer image files from your computer to your CLIÉ handheld. [. . . ]