User manual GIGABYTE R180-F34

[. . . ] 1. 0 Dual LGA2011 sockets R3 motherboard for Intel® E5-2600 V3 series processors Copyright © 2014 GIGA-BYTE TECHNOLOGY CO. , LTD. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE. Changes to the specifications and features in this manual may be made by GIGABYTE without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without GIGABYTE's prior written permission. Documentation Classifications In order to assist in the use of this product, GIGABYTE provides the following types of documentations:  For detailed product information, carefully read the User's Manual. For more information, visit our website at: http://b2b. gigabyte. com You are a professional? [. . . ] Enable/Disable onboard LAN devices and initialize device expansion ROM. Default setting is Enabled. Onboard LAN#1/#2Controller Onboard LAN #1/#2 I/O ROM PCI Devices Common Settings PCI Latency Timer VGA Palette Snoop Value to be programmed into PCI Latency Timer Register. Options available: 32 PCI Bus Clocks/64 PCI Bus Clocks/96 PCI Bus Clocks/128 PCI Bus Clocks/160 PCI Bus Clocks/192 PCI Bus Clocks/224 PCI Bus Clocks/248 PCI Bus Clocks/. Enable/Disable VGA Palette Tegisters Snooping. Default setting is Disabled. Above 4G Decoding - 48 - BIOS Setup SR-IOV Support If system has SR-IOV capable PCIe Devices, this option enables or disables Single Root IO Virtualization Support. Press [Enter] for configuration of advanced items. PCI Express Settings BIOS Setup - 49 - 5-2-2-1 PCI Express Settings PCI Express Device Register Settings Relaxed Ordering Enable/DIsable PCI Express Device Relaxed Ordering feature. Wnen this feature is enabled, the system will allow device to use 8-bit Tag field as a requester. Enable/Disable PCI Express Device No Snoop option. Set maximum playload for PCI Express Device or allow system BIOS to select the value. Options available: Auto/128 Bytes/256 Bytes/512 Bytes/1024 Bytes/2048 Bytes/4096 Bytes. Default setting is Auto. Extended Tag No Snoop Maximum Playload PCI Express Link Register Settings Extended Synch Link Training Retry Wnen this feature is enabled, the system will allow generation of Extended Synchronization patterns. Define the number of Retry Attempts software wil take to retrain the link if previous training attempt was unsuccessful. Options available: Disabled/2/3/5. Default setting is 5. - 50 BIOS Setup Link Training Timeout (us) Define the number of Microseconds software will wait before polling 'Link Training' bit in Link Status register. Press <+> / <-> keys to increase or decrease the desired values. When this item is set to 'Disable Link, the system will operate power save feature for those unpopulated PCI Express links. Options available: Keep Link ON/ Disable Link. Default setting is Keep Link ON. Unpopulated Links BIOS Setup - 51 - 5-2-3 Network Stack Network stack Enable/Disable UEFI network stack. Press <+> / <-> keys to increase or decrease the desired values. Press <+> / <-> keys to increase or decrease the desired values. Ipv4 PXE Support(Note) Ipv6 PXE Support(Note) PXE boot wait time(Note) Media detect time(Note) (Note) This item appears when Network Stack is set to Enabled. - 52 - BIOS Setup 5-2-4 CSM Configuration Compatibility Support Module Configuration CSM Support Enable/Disable Compatibility Support Module (CSM) support. Upon Request: GA20 can be disabled using BIOS services. [. . . ] Press [Enter] to load additional db from a storage devices. Set new DB Append aVar to DB Forbidden Signature Database (DBX) Delete the DBX Set DBX from File Append Var to DBX BIOS Setup - 111 - 5-6 Boot Menu The Boot menu allows you to set the drive priority during system boot-up. BIOS setup will display an error message if the legacy drive(s) specified is not bootable. Boot Configuration Setup Prompt Timeout Number of seconds to wait for setup activation key. 65535(0xFFFF) means indefinite waiting. " Press the numberic keys to input the desired value. Enable or Disable Bootup NumLock function. [. . . ]