User manual GIGABYTE TC4

[. . . ] FCC COMPLICANCE STATEMENT For Users in the USA This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These rules are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. [. . . ] Do not rub the inside of the product with a wet cloth or expose the product to water in any case. Please turn the power off before connecting or assembling any peripheral. May/2003 2 ¡½ Product features ¡½ TA series has been equipped with the motherboards developed by Gigabyte Technology to ensure the best performance under Windows environment. Rack-mounted case design provides easy assembly and maintenance, and makes system upgrade a piece of cake! Warning Improper battery installation may cause explosion. Use only the same or equivalent batteries for eplacement. Dispose batteries as instructed by their manufacturers. English User's Manual ¡½ Specifications ¡½ -Product specification -PC case -TA series Motherboard -Power supply unit -24X Slim CD-ROM or DVD-Rom (Optional) -PCMICA Slot (optional) -2. 5-inch Slim HDD (Optional) -Power cord -Keyboard and mouse (Optional and subject to real products at shipment) -Accessories System Assembly Manual Driver CD Ribbon cable Screws for Slim HDD and Slim CD-ROM ¡½ System Packing ¡½ Manual and Driver CD *Keyboard (Optional) ( ) *mouse (Optional) ( ) ) 3 Power cord PC Specification with "Option" are subject to change without notice. English User's Manual 1. PC case Overall dimension With side cover: 70(W)mm x 236(H)mm x 213(D)mm Without side cover: 64(W)mmx230(H)mmx213(D)mm Materials of the case has been tested to comply with the UL specification and designed for space and screw saving purposes. Users simply need to remove one screw from the back to unload the case cover and access to the inside of the case. Moreover, the case has been designed with anti EMI function and complies with standard PC safety standards. 2. Parts on Panels Front Panel 1. MIC 2. Audio Out 3. USB Ports 4. Power Button 5. Power LED 6. LAN LED 7. HDD LED 8. CD Button 9. PCMCIA Slot 10. PCMCIA Button 11. JIEEE1394 12. 6 in 1 Card Rear Panel 1. Keyboard (PS2) 2. USB port 3. VGA/DVI 4. COM 1 5. Audio Out 6. Audio In 7. MIC 8. Power Cord 9. Mouse (PS2) 10. LAN (RJ45) 11. LPT 12. COM 2 13. SPDIFOut 14. System FAN 15. IEEE 1394 16. S Video ( TA ) 4 5 6 7 8 ( TC ) 4 6 5 8 4 1 2 3 9 11 1 2 12 10 3 ( TA2) 1 2 3 11 16 15 5 6 7 7 8 4 5 6 9 1 10 2 15 16 3 13 ( TA4) 9 10 11 4 8 14 English User's Manual 3. System equipment installation ¡½ Unload case ¡½ Step 1: Remove the screw from the bottom of the case. Step 2: Grasp the handle on the panel and pull out the case. 5 ¡½ Installing hard drive ¡½ Step 1: Fix the hard drive on the base with screws and connect the hard drive with the IDE ribbon cable. Screw stands (Attention!Install hard drive on top of the screw stands on the base. ) Red (fool-proof) wire should be connected to PIN 1. (Attention!Make sure that the red (fool-proof) wire on the ribbon cable should be connected to PIN 1 of the hard drive as shown below. ) English User's Manual Step 2: Fix the hard drive with its rack on the four posts and connect the ribbon cable to the IDE connector (J1). ¡½ Installing DOM (DISK On Module) ¡½ Step 1: Install DOM on the DOM slot (J1). 6 Attention! [. . . ] Use only the same or equivalent batteries for replacement. Dispose batteries as instructed by their manufacturers. English [. . . ]