User manual GN NETCOM GN 1000

[. . . ] Ring Sensitivity LED/Online Indicator: Lights when the handset is lifted and you have clear dialtone; flashes when the Ring Sensor Power Button is disabled. Ring Sensor On/Off Button: Press to disable the Ring Sensor if using the speakerphone when your phone is connected to a wireless headset Beltpack system. 10. Velcro Setting Up Using the System Frequently Asked Questions 1. Affix the Ring Sensor Platform to the telephone. [. . . ] Refer to the instructions that came with your phone system. What should I do if I hear a signal in my headset, but no call comes through?· The Ring Sensor may be picking up electronic "noise. " Move your telephone and/or wireless system away from electronic equipment, such as a computer monitor, fluorescent desk lamp, etc. · Lower the Ring Sensor's sensitivity, by turning the adjustment knob counterclockwise. What should I do if calls are coming in, but I don't hear a signal in my headset or from my beltpack?· Make sure the Ring Sensor On/Off Button is on. If the red Ring Sensitivity LED is flashing, the Ring Sensor is off. Press the button on the front of the Lifter to reactivate. · Make sure the Ring Sensor is located over the telephone's speaker. · Adjust the Ring Sensor's sensitivity. While the phone is ringing, turn the Ring Sensitivity Knob until the Ring Sensor LED lights. Stop turning as soon as LED lights for best performance. What should I do if my Online Indicator doesn't light when I'm on a call?· Adjust the Ring Sensor's sensitivity. While on a call, turn the Ring Sensitivity Knob clockwise (only slightly) until the light comes on. How do I stop my Headset/Beltpack from signaling I have a call when I use my telephone's speakerphone? [. . . ] When disabled, the Ring Sensitivity LED rapidly flashes. Netco m 3. Connect the Remote Handset Lifter to your wireless system. Insert the AUX Plug into the large port marked AUX on the base of your wireless headset system (you will need to remove the Stand to access this port). * * Refer to the instructions that came with your wireless headset system for location of buttons and functions. Netco m Netco m 8. Adjust the Ring Sensor Sensitivity by turning the knob clockwise to increase the sensitivity and counterclockwise to decrease the sensitivity. While the phone is ringing, turn the knob until the Ring Sensor LED lights. [. . . ]