User manual GN NETCOM GN 9120

[. . . ] 1a 1e 8 1b 1c 1d 1 7 9 3 2b 2d 2c 2a 2 4 5 6 English - GN 9120 user guide This user guide provides you with information and instructions on assembling, using and maintaining your GN 9120. This guide contains the following sections: · · · · · · · About the GN 9120 Assembling Battery charging and assembly verification Features and customisation Answering and making telephone calls Frequently asked questions Operational and safety information About the GN 9120 The GN 9120 is a cordless headset solution, made up of a cordless headset and a base unit that is connected to your telephone. The GN 9120 gives you full mobility, handsfree convenience and superior sound quality for your telephone conversations. Assembling To integrate the unit to your telephone: 1. Disconnect the handset cord from the telephone's handset socket and connect it to the socket marked 0 on the base unit (1). [. . . ] Gently press the headband ring to the headset receiver until it clicks. The square knob on the headband ring will match the square hole in the headset receiver. Click the earcushion on to the headset receiver. To attach an earhook for over-the-ear wearing style: 1. Gently press the earhook ring to the headset receiver. The square knob on the earhook ring will match the square hole in the headset receiver. Attach the earhook to the earhook ring's clutch. After attaching the earhook, you may now adjust the headset to be worn on your right or left ear, depending on personal preference. See the changing wearing ear section for instructions. Changing wearing ear Headband (3) wearing style. Your headband allows you to wear your headset on your right or left ear, according to personal preference. Simply rotate the boomarm 180 degrees and your headset is ready for wearing on the other ear. Note: The boomarm cannot be rotated a full 360 degrees. Do not force the boomarm when it cannot be rotated any further. 7 GN9120_contents_final. indd 6-7 Process Cyan Process Magenta 20-11-2002, 12:29:08 Process Yellow Process Black Earhook (4) wearing style. With an earhook, you can wear your headset on your right or left ear, according to personal preference. Note: The boomarm cannot be rotated a full 360 degrees. Do not force the boomarm when it cannot be rotated any further. Detach the earhook from the earhook clutch. Rotate the inner earhook ring 180 degrees. Insert the earhook into the earhook clutch. Note: Repeat steps 3-5 to add more headsets to the conference mode. Up to 4 headsets may participate in the conference mode. Answering and making telephone calls Answering telephone calls: To answer a telephone call: 1. [. . . ] · Check that the mute function is off. · Readjust the microphone volume. · Check the position of the boomarm and make sure that the microphone is placed as close as possible to your mouth. · You may be out of range (up to 100 m, depending on environment) of the headset's base unit. [. . . ]