User manual GOLDEN STATE INTERNATIONAL 40-301

[. . . ] · Replacement battery type: CR 2025 TEMPERATURE · In temperature mode, press "D" to change from Celsius to Fahrenheit, press "D" again to change it back. · Press "D" to start the stopwatch. BUTTONS · Button operations are indicated using the letters as shown in the illustration. "A" "D" "B" "C" Important: · The temperature reading function measures ambient temperature, not body temperature. · Temperature reading may vary from ambient temperature. The expected range of variation is as follows: +/- 2 degrees Celsius +/- 4 degrees Fahrenheit Environmental factors may produce larger variances. Contact with body may result in greater variation. [. . . ] For best results, remove watch from wrist and place in location where temperature reading is desired. · Temperature readings are updated every 10 minutes. While updating, display may show -4° or -20°. Pressing the "D" button will reset to show reading. · The watch may take up to 30 minutes to accurately register large changes in temperature. Setting the Alarm · In alarm mode, press "C" until the hour flashes. Flashing indicates that the hour is ready to be set. · Press "D" again to stop the stopwatch. · Press the "D" to change the hour. Press "D" and hold to scroll through the numbers quickly. Split Time 1. In stopwatch mode, press "D" to start the stopwatch. A. Set BACKLIGHT · In any mode, press "A" to illuminate the display. The backlight will stay on for 3 seconds. This warranty does not apply to normal wear and tear or abuse, and excludes the battery, crystal, strap or bracelet. It does not cover costs, parts, labor, defects or damage caused by any source other than Golden State International. Warranty will be void if there is evidence that the case back has been tampered with. Within this warranty period, if you return your watch due to a manufacturer's defect, there are no shipping and handling charges. If the warranty period has expired, there is a US$5. 00 shipping charge. If you would like the battery, case crystal and/or strap replaced, please see the price list of additional charges below. We recommend that you do not get leather straps wet as moisture may cause discoloration. Water Resistance ­ Exposure to moisture may result in rust and failure of metal and/or mechanical portions of a watch. Only watches with the words "water resistant" engraved on the back of the watch may be safely submerged in water. 30M marking is OK for showering, washing, etc. [. . . ] Only watches with the words "water resistant" engraved on the back of the watch may be safely submerged in water. 30M marking is OK for showering, washing, etc. 50M marking is OK for swimming and bathing. The watch will remain water resistant only as long as the crown and case remain intact. [. . . ]