User manual GOLDEN STATE INTERNATIONAL 40-318

[. . . ] If it is placed on carpet or a rug, adjust the feet in such a way as to allow a sufficient ventilation space underneath the washing machine. Connecting the electricity and water supplies Connecting the water inlet hose Unpacking and levelling Unpacking 1. Remove the washing machine from its packaging. Make sure that the washing machine has not been damaged during the transportation process. [. . . ] The duration of the cycle will appear on the display. Use the relevant buttons: Modifying the temperature and/or spin speed.  The machine automatically selects the maximum temperature and spin speed set for the selected wash cycle; these values cannot therefore be increased. The temperature can be decreased button, until the cold wash by pressing the "OFF" setting is reached. The spin speed may be button, progressively reduced by pressing the until it is completely excluded (the "OFF" setting). If these buttons are pressed again, the maximum values are restored. To set a delayed start for the selected programme, press the corresponding button repeatedly until the required delay period has been reached. When this symbol lights up on the option is enabled, the display. To remove the delayed start function press the button until the text "OFF" appears on the display. • Press the button to enable the function; the indicator light corresponding to the button will switch on. • Press the button again to disable the function; the indicator light will switch off. compartment 3: Additives (fabric softeners , etc. ) The fabric softener should not overflow the grid. Preparing the laundry • Divide the laundry according to: - the type of fabric/the symbol on the label - the colours: separate coloured garments from whites • Empty all garment pockets and check the buttons. • Do not exceed the listed values, which refer to the weight of the laundry when dry: Durable fabrics: max. Mix 15’: this wash cycle was designed to wash lightly soiled garments quickly: it lasts just 15 minutes and therefore saves both energy and time. By selecting this wash cycle ( at 30°C), it is possible to wash different fabrics together (except for wool and silk items), with a maximum load of 1. Baby cycle: this wash cycle can be used to remove the soiling typically caused by babies, while ensuring that all detergent is removed from nappies in order to prevent the delicate skin of babies from suffering has been designed to reduce allergies. The cycle the amount of bacteria by using a greater quantity of water and optimising the effect of special disinfecting additives added to the detergent. At the end of the wash cycle, the machine will slowly rotate the drum to prevent the formation of creases; to end the cycle press the START/PAUSE button. To wash all silk Silk: use special wash cycle garments. We recommend the use of special detergent which has been designed to wash delicate clothes. [. . . ] gB Problem: The washing machine does not switch on. Possible causes / Solutions: • The appliance is not plugged into the socket fully, or is not making contact. • • • • • • • • • • The washing machine door is not closed properly. The START/PAUSE button has not been pressed. [. . . ]