User manual GOLDEN STATE INTERNATIONAL 40-905

[. . . ] If it is placed on carpet or a rug, adjust the feet in such a way as to allow a sufficient ventilation space underneath the washing machine. Read these instructions carefully: they contain vital information relating to the safe installation and operation of the appliance. Connecting the electricity and water supplies Connecting the water inlet hose Unpacking and levelling Unpacking 1. Remove the washing machine from its packaging. [. . . ] String E shows the maximum temperature value which may be selected (this depends on the wash cycle used); if the temperature of the wash cycle cannot be modified, the string remains unused. Indicator lights F correspond to the functions and light up when the selected function is compatible with the set wash cycle. Door locked symbol If the symbol is lit, this indicates that the washing machine door is blocked to prevent it from being opened accidentally. To prevent any damage from occurring, wait for the symbol to switch itself off before opening the appliance door. : if the DELAYED START function has been activated, the door cannot be opened; pauses the machine by pressing the START/PAUSE button if you wish to open it. The first time the machine is switched on, you will be asked to select the language and the display will automatically show the language selection menu. € Press the button again to disable the function; the indicator light will switch off. The indicator light corresponding to the first function selected will flash and only the second function will be activated; the indicator light corresponding to the enabled function will remain lit. The functions may affect the recommended load value and/or the duration of the cycle. The corresponding indicator light will become green, remaining lit in a fixed manner, and the door will be locked (the DOOR LOCKED symbol will be on). During the wash cycle, the name of the phase in progress will appear on the display. 3) At 60 °C the “Prewash” function cannot be selected. For all Test Institutes: 2) Long wash cycle for cottons: set wash cycle 4) Long wash cycle for synthetics: set wash cycle 40°C (2nd press of the button). 60°C (1st press of the button); temperature of 40°C (press TEMPERATURE button). Wash functions This option offers a highperformance wash due to the greater quantity of water used 4 in the initial phase of the cycle, and due to the increased wash cycle duration, is particular1 ly useful for the removal of 2 stubborn stains. It can be used 3 with or without bleach. If you desire bleaching, insert the extra tray compartment (4) into compartment 1. When pouring in the bleach, be careful not to exceed the “max” level marked on the central pivot (see figure). To bleach laundry without carrying out a full wash cycle, pour the bleach into the extra compartment 4, select the “Rinse” cycle and activate the “Super Wash” option. The use of extra compartment 4 excludes the “Pre-wash” function. It cannot be used with the , , , , “Spin”, “Pump out”. MAX Super Wash Easy Iron By selecting this function, the wash and spin cycles will be modified in order to reduce the formation of creases. [. . . ] Make sure the wash cycle has finished and unplug the appliance. 12 Troubleshooting Your washing machine could fail to work. Before contacting the Technical Assistance Centre (see “Assistance”), make sure that the problem cannot be solved easily using the following list. gB Problem: The washing machine does not switch on. [. . . ]