User manual GOODMANS 255NSB

[. . . ] If you are in any doubt of this connection please contact the vehicle dealer or Goodmans installation helpline. IMPORTANT: Do not forget to remove the transit screws on top of the unit, before removing the fixing cage and installing the unit. Failure to do so will result in the CD not playing. P. 2 Goodmans Product Information Helpline (02392) 391100 Installation Helpline (01132) 868613 ACCESSORIES Please retain the carton and packing materials, as this is the best protection for the unit should it be necessary to return it for servicing. (1) 1 x 15 Amp fuse (spare fuse for + 12 volt supply wire of the unit). [. . . ] By this function, the unit automatically monitors the station and changes its mode to the traffic information reception when the broadcast starts even whilst listening to CD. P. 18 Goodmans Product Information Helpline (02392) 391100 Installation Helpline (01132) 868613 STATION NAME DISPLAY 15 Note: Station name will only show when using FM band. Tune in a desired FM station using the automatic or manual tuning methods. If the received station is transmitting RDS data. In a few seconds, station name will be displayed. FI 104. 30 BBC RI Notes · RDS data can be received only on the FM band. It cannot be received on the MW/LW band. · The RDS functions of this unit cannot be used if the received FM station is not transmitting the RDS data and may not work properly in area without RDS transmission. To change the display to frequency or programme type name Press DSP (Display) (15) Press on DSP (15) changes the display as follows: Station name display Clock Frequency display Program type display If the RDS station is not transmitting the PTY (program type) or CT (Clock) data, programme type or clock will not show in the display. P. 19 Goodmans Product Information Helpline (02392) 391100 Installation Helpline (01132) 868613 AF function AUTOMATIC RE-TUNING 3 Note: Auto Re-tuning will only operate on FM band. Tune to a desired RDS station using the automatic or manual tuning methods. AF function is switched ON/OFF by pressing the AF button (3). If the station selected is not acceptable, alternative TA transmitting stations can be selected by leaving TA switched on and using Auto/Manual or PTY tuning methods. "Please note that TP (RDS symbol for TA) will show in the display when you are tuned to a station which is capable of broadcasting Traffic information. " Note: If the Regional function is on , a regional station with traffic announcement is received. If the radio was in CD mode, it switches temporarily to Radio mode, and the display will show the Programme Service name of the received station. If the volume was low, it is raised to a preset to a preset level or the preferred TA level set using the select function. The TA symbol blinks during reception of a TA broadcast. At the end of the traffic announcement, the original station or CD function is restored again. If the user has not changed the volume setting. It is restored to the level before the traffic announcement. If the volume level was changed, during the traffic announcement, the new level will be retained. E. O. N. When a traffic announcement is detected via EON, the radio will switch to the linked programme transmitting the traffic announcement. The radio will remain at least 4 seconds on this programme before switching back to the original programme. [. . . ] 29 Goodmans Product Information Helpline (02392) 391100 Installation Helpline (01132) 868613 TROUBLE SHOOTING The following indicator appears. If this indicator still appears after pressing the RESET button, consult your nearest service dealer. BEFORE SET REMOVAL 1 Take out the disc. If a disc remains in the CD player, the disc or set may be seriously damaged in transportation. 2 Turn off the power switch. CAUTION: Metal parts of this unit (especially on the back) become quite hot during operation, be careful to avoid touching parts immediately after removing the unit. TROUBLE SHOOTING The following checks will assist in the correction of most problems which you may en counter with your unit. Should any problem persist after you have made these checks consult your nearest service dealer. [. . . ]