User manual GOVIDEO DDV9475 Product Manual

[. . . ] DDV9475 User's Guide Go-Video/Sensory Science 7835 East McClain Drive Scottsdale, Arizona USA 85260 www. sensoryscience. com www. govideo. com WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. Do not open the cabinet; dangerous high voltage is present. Refer servicing to qualified personnel only. This video cassette recorder should only be used with 120V, 60Hz (standard U. S. [. . . ] When Auto Channel Search is finished, it will display the lowest channel found. Ch03 30 DDV9475 USER'S GUIDE Add Channel Follow these steps to add a channel that was not detected during Auto Channel Search. 1 2 Open "Setup Menu" Press and hold the Menu button for 3 seconds. 1 2: 3: 4: 5: SETUP MENU Set Clock Menu Copy/Record Settings Tuner And Channel List Dual-Deck Features Reset Factory Settings ____________________________________ / = Move = Sel MENU=Quit Select "Tuner & Channel List" Press 3. TUNER AND CHANNEL LIST CH ## Auto Tuner Band Auto Channel Search Add Channel Remove Channel Show Weak Channels No Tuner Audio Stereo ____________________________________ / = Move = Sel MENU=Quit 3 4 5 Select "Add Channel" Press the down arrow until Add Channel is selected. TUNER AND CHANNEL LIST CH ## Tuner Band Auto Auto Channel Search Add Channel Remove Channel Show Weak Channels No Tuner Audio Stereo ____________________________________ / = Move = Sel MENU=Quit Tune the Channel Use the number keys (0-9) to enter the channel number, e. g. "1-1" for Channel 11. TUNER AND CHANNEL LIST CH 11 Tuner Band Auto Auto Channel Search Add Channel Remove Channel Show Weak Channels No Tuner Audio Stereo ____________________________________ / = Move = Sel MENU=Quit Add the Channel Press the right arrow to add the channel to your channel list. Repeat steps 4 and 5 to add more channels. TUNER AND CHANNEL LIST CH 11 Tuner Band Auto Auto Channel Search Add Channel Remove Channel Show Weak Channels No Tuner Audio Stereo ____________________________________ / = Move = Sel MENU=Quit TUNER AND CHANNEL LIST 31 Remove Channel Follow these steps to remove a channel that was stored during Auto Channel Search. 1 2 3 4 5 Open "Setup Menu" Press and hold the Menu button for 3 seconds. 1 2: 3: 4: 5: SETUP MENU Set Clock Menu Copy/Record Settings Tuner And Channel List Dual-Deck Features Reset Factory Settings ____________________________________ / = Move = Sel MENU=Quit Select "Tuner & Channel List" Press 3. TUNER AND CHANNEL LIST CH ## Auto Tuner Band Auto Channel Search Add Channel Remove Channel Show Weak Channels No Tuner Audio Stereo ____________________________________ / = Move = Sel MENU=Quit Select "Remove Channel" Press the down arrow until Remove Channel is selected. TUNER AND CHANNEL LIST CH ## Tuner Band Auto Auto Channel Search Add Channel Remove Channel Show Weak Channels No Tuner Audio Stereo ____________________________________ / = Move = Sel MENU=Quit Tune the Channel Use the Ch +/­ buttons or the number keys (0-9) to enter the channel number. TUNER AND CHANNEL LIST CH 11 Tuner Band Auto Auto Channel Search Add Channel Remove Channel Show Weak Channels No Tuner Audio Stereo ____________________________________ / = Move = Sel MENU=Quit Remove the Channel Press the right arrow to remove the selected channel from your channel list. Repeat steps 4 and 5 to remove additional channels. TUNER AND CHANNEL LIST CH 11 Tuner Band Auto Auto Channel Search Add Channel Remove Channel Show Weak Channels No Tuner Audio Stereo ____________________________________ / = Move = Sel MENU=Quit 32 DDV9475 USER'S GUIDE Show Weak Channels When you run Auto Channel Search, it will skip channels with weak signals, i. e. With Show Weak Channels, you can add more channels to your list by lowering the cut-off point at which a picture is acceptable to view. 1 2 Open "Setup Menu" Press and hold the Menu button for 3 seconds. 1 2: 3: 4: 5: SETUP MENU Set Clock Menu Copy/Record Settings Tuner And Channel List Dual-Deck Features Reset Factory Settings ____________________________________ / = Move = Sel MENU=Quit Select "Tuner & Channel List" Press 3. TUNER AND CHANNEL LIST CH ## Auto Tuner Band Auto Channel Search Add Channel Remove Channel Show Weak Channels No Tuner Audio Stereo ____________________________________ / = Move = Sel MENU=Quit 3 Select "Show Weak Channels" Press the down arrow until Show Weak Channels is selected. TUNER AND CHANNEL LIST CH ## Tuner Band Auto Auto Channel Search Add Channel Remove Channel No Show Weak Channels Tuner Audio Stereo ____________________________________ / = Move = Sel MENU=Quit 4 Set "Show Weak Channels" Press the right arrow repeatedly to set Show Weak Channels to Yes or No. TUNER AND CHANNEL LIST CH ## Tuner Band Auto Auto Channel Search Add Channel Remove Channel No Show Weak Channels Tuner Audio Stereo ____________________________________ / = Move = Sel MENU=Quit No Yes TUNER AND CHANNEL LIST 33 Tuner Audio Most television programs are broadcast in stereo. However, in certain circumstances, you may wish to set the Tuner Audio to mono, SAP or TV+SAP. 1 2 3 4 Open "Setup Menu" Press and hold the Menu button for 3 seconds. 1 2: 3: 4: 5: SETUP MENU Set Clock Menu Copy/Record Settings Tuner And Channel List Dual-Deck Features Reset Factory Settings ____________________________________ / = Move = Sel MENU=Quit Select "Tuner & Channel List" Press 3. TUNER AND CHANNEL LIST CH ## Auto Tuner Band Auto Channel Search Add Channel Remove Channel Show Weak Channels No Tuner Audio Stereo ____________________________________ / = Move = Sel MENU=Quit Select "Tuner Audio" Press the down arrow until Tuner Audio is selected. TUNER AND CHANNEL LIST CH ## Tuner Band Auto Auto Channel Search Add Channel Remove Channel Show Weak Channels No Tuner Audio Stereo ____________________________________ / = Move = Sel MENU=Quit Set "Tuner Audio" Press the right arrow repeatedly to set Tuner Audio to: · Stereo -- Two-channel Hi-Fi sound split into left and right channels. When a show is not broadcast in stereo, the sound reverts to Mono. · Mono -- Monaural, or single-channel, audio. Use when connecting the VCR to a Mono output device, such as a monitor. TUNER AND CHANNEL LIST CH ## Tuner Band Auto Auto Channel Search Add Channel Remove Channel Show Weak Channels No Tuner Audio Stereo ____________________________________ / = Move = Sel MENU=Quit Stereo Mono SAP TV + SAP 34 DDV9475 USER'S GUIDE · SAP -- Second Audio Program. Optional audio signal, often used to transmit a second language, news, or weather broadcasts. SAP will appear on the front panel display if it is available. · TV+SAP -- Broadcasts Mono sound out of the left channel and SAP out of the right channel. This is useful if you want to listen to a second language with headphones while the primary language is played through the speakers. TUNER AND CHANNEL LIST 35 36 DDV9475 USER'S GUIDE 5 - Copy Features Basic Copying To copy a tape, simply put your source tape in Deck 1, your blank tape in Deck 2, and press Copy Tape. The tape in Deck 1 will begin copying to Deck 2. 1 Insert Source Tape Power Hi-Fi Deck Hi-Fi Deck Copy Tape Put the tape you wish to copy in Deck 1 on the left side of the VCR. Stop / Eject Pause Rewind Play F. Forward Record Deck Select DDV9475 2 3 Insert Target Tape Hi-Fi Deck Hi-Fi Deck Put your blank tape in Deck 2 on the right side of the VCR. Power Copy Tape Stop / Eject Pause Rewind Play F. Forward Record Deck Select DDV9475 Copy Your Tape Press the Copy Tape button on either the remote control or the front of the VCR. The tape in Deck 1 will begin copying to Deck 2. · To pause copying, press Copy Tape. · To resume copying, press Copy Tape again. · To stop copying, press Stop/Eject on both decks; see Sync Editing on page 66. Copy Tape COPY FEATURES 37 EZ Copy EZ-Copy automates the entire copy process so you can copy an entire tape at the touch of a button. Just press the Copy Tape button, and the VCR will rewind both decks completely, copy the source tape to the target tape, rewind both decks again, and eject the tapes. 1 Open "Main Menu" Press the Menu button on the remote control. 1 2: 3: 4: 5: 6: MAIN MENU EZ Copy Off Child Lock Off Timer Recording 8-Scene Edit List Setup Titler Message Language/Langue/Idioma / To Move To Select MENU to Quit Hold MENU Key For Setup 2 Set "EZ Copy" Press 1 repeatedly to turn EZ Copy on or off: · On -- When Copy Tape is pressed, both decks will rewind, the tape in Deck 1 will be copied to Deck 2, both decks will rewind again, and the tapes will be ejected. · Off -- When Copy Tape is pressed, the tape in Deck 1 will begin copying to Deck 2 immediately from the current position of both decks. [. . . ] Some brands of television will only respond to a limited number of functions. See the table on page 86 for a list of common brands and functions. APPENDIX B - HELP 91 Technical Specifications VIDEO SYSTEM TELEVISION SYSTEM AUDIO TRACK TAPE WIDTH TAPE SPEED PLAY/RECORD TIME FF/REW TIME HEADS Video: Audio: Control: Erase: VIDEO Input: Output: Horiz Res: S/N Ratio: AUDIO Input: Output: TV Tuner: 1/2-inch VHS system, 4 rotary head helical scanning; FM azimuth luminance; chrominance: converted sub system phase shift NTSC-type color signal EIA standard (525 lines, 60 fields) Normal: 1 track; Hi-Fi: 2 track 12. 7 mm, 1/2 inch SP: 33. 35 mm/s; SLP: 11. 12 mm/s T-180 tape: SP 3 hours, SLP 9 hours T-120 tape: <110 seconds DA 4 rotary heads 2 rotary heads (Hi-Fi); 1 stationary head (Linear) 1 stationary head 1 full track, 1 audio track RCA Type, 75 ohms unbalanced, 1 V P-P RCA Type, 75 ohms unbalanced, 1 V P-P Monochrome, more than 230 lines Better than 43 dB AUDIO IN (RCA) -8 dbm, 47K ohms AUDIO OUT (RCA) -8 dbm, 1. 5K ohm 181 channel frequency synthesized. Cable Ch 5A, A-5 through A-1, A-I, J through W+58, W+59 through W+84. Better than 68 dB (Hi-Fi) Less than 0. 005% (Hi-Fi) Channel 3 or 4 20-20, 000 Hz (Hi-Fi) 120V AC, 60 Hz, 26 watts maximum 1 minute 41-104° F (5-40° C); 10%-75% humidity 21" x 4" x 13" (534 x 105 x 331 mm) 17 lbs. [. . . ]