User manual GP BATTERIES PB50

[. . . ] Power LED will light up when power is connected. Insert AA or AAA NiMH batteries into the charging slots according to the polarity indications (+/-). Different contact plates for AA and AAA NiMH batteries are set in the outer and inner part of the charging slots respectively. [. . . ] Remove batteries from an electrical device if it will not be used for a long time. The batteries should be removed from the charger before they are scrapped and disposed of properly. If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent to avoid a hazard. Do not charge other types of batteries, such as alkaline, carbon zinc, lithium, rechargeable alkaline or any other unspecified batteries, as they may leak or burst, causing personal injury and damage. Never use an extension cord or any attachment not recommended by GP, as this may lead to a risk of fire, electric shock or personal injury. Unplug the charger from the outlet before attempting to clean or when not in use. Do not expose the charger to rain, snow or extreme conditions. Compact charger with AC cord Charge 1 to 4 AA or AAA NiMH rechargeable batteries Equipped with 4 individual charging channels Termination methods: - Individual minus delta voltage (-dV) - Individual temperature sensor - Individual safety timer Over-temperature protection Primary and damaged batteries detection Easy check LED icons Battery ejector Safety guaranteed Read the instruction manual thoroughly before use. Each charging slot can only charge 1 battery (either AA or AAA). Connect the provided AC cord with the charger and plug it into the power source (Fig. Power LED will light up when power is connected. Insert AA or AAA NiMH batteries into the charging slots according to the polarity indications (+/-). Different contact plates for AA and AAA NiMH batteries are set in the outer and inner part of the charging slots respectively. 3) When inserting AAA batteries into the charging slots, slant the batteries to ensure smooth contact with the plates. If alkaline, carbon zinc, lithium, rechargeable alkaline or damaged batteries are mistakenly inserted into the charging slots, the corresponding Battery Icon and the Warning Icon will blink fastly and the charger will stop charging. If the charger does not work properly, all Battery Icons and the Charging Icon will turn off. [. . . ] If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent to avoid a hazard. Do not charge other types of batteries, such as alkaline, carbon zinc, lithium, rechargeable alkaline or any other unspecified batteries, as they may leak or burst, causing personal injury and damage. Never use an extension cord or any attachment not recommended by GP, as this may lead to a risk of fire, electric shock or personal injury. [. . . ]