User manual GRACO 15H885 ETHERNET

[. . . ] For the module to start using the new address, the module needs to be reset. Navigate to Pr MM. 00 (Pr 16. 00 if installed in slot 2), set its value to 1070, and press the red Stop/Reset switch to reset the module. Never install or remove the Ethernet module while power is applied to the VFD. Disable the Hardware Enable input (press Secure Disable switch). [. . . ] If default IP address is acceptable, navigate to Pr MM. 00 (Pr 16. 00 if installed in slot 2), set its value to 1000, and press the red Stop/Reset switch to Note that Code 1070 will cause the AppsLite module to reset as well, which will cause the pump to stop running if it was not stopped prior to the reset. 2 311612B E-Flo Software E-Flo Software The CD supplied with the kit includes zipfile 15K581, which contains the E-Flo software (Visual Basic application). Install the CD into your computer, extract the files from the zipfile, and follow the software installation instructions as they appear on the screen. Once the installation is complete the appear on the screen. icon will Graco uses a Visual Basic program to display the run screen on the computer. This software and program is not supported by Graco. See the instruction in the VFD manual 311596 to complete the software installation and for operating instructions. 311612B 3 Graco Standard Warranty Graco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective. This warranty applies only when the equipment is installed, operated and maintained in accordance with Graco's written recommendations. This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by faulty installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of non-Graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility of Graco equipment with structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture, installation, operation or maintenance of structures, accessories, equipment or materials not supplied by Graco. This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for verification of the claimed defect. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The equipment will be returned to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect in material or workmanship, repairs will be made at a reasonable charge, which charges may include the costs of parts, labor, and transportation. THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. Graco's sole obligation and buyer's sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no other remedy (including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any other incidental or consequential loss) shall be available. [. . . ] Phone: 612-623-6921 or Toll Free: 1-800-328-0211 Fax: 612-378-3505 All written and visual data contained in this document reflects the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice. MM 311612 Graco Headquarters: Minneapolis International Offices: Belgium, China, Japan, Korea GRACO INC. [. . . ]