User manual GRACO PRO XS2

[. . . ] Do not use equipment until you identify and correct the problem. Do not plug or unplug power cords or turn lights on or off when flammable fumes are present. Keep work area free of debris, including solvent, rags and gasoline. Keep a working fire extinguisher in the work area. [. . . ] However, if non-Graco gloves are worn, cut off glove fingers or cut out palm area, to ensure your hand contacts grounded gun handle. Ground all fluid and waste containers, and all other conductive objects in spray area. Keep workpiece hangers clean and grounded. Floor of spray area must be electrically conductive and grounded. Do not cover floor with cardboard or any non-conductive material. Follow steps 1-22 to setup gun for spraying. Adjust fluid regulator until stream from gun travels 8-12 in. Typically, if fluid pressure is below 5 psi (. Set gun air regulator to deliver minimum 40 psi (0. Follow steps 1-6 below when using gun first time, changing colors, before fluid dries, at end of day, and before storing gun. Change fluid source to solvent, or disconnect fluid line and connect solvent supply line to gun. Flush until clean solvent flows from gun. Follow steps 1-5 when you stop spraying and before cleaning, checking, or repairing equipment. If nozzle or hose is completely clogged or pressure is not fully relieved, slowly loosen hose end coupling. Follow steps 1-2 at end of workshift and before cleaning, checking, or repairing equipment. Clean outside of gun with non-conductive, compatible solvent. Clean air cap, retaining ring, and nozzle with soft brush and non-conductive, compatible solvent. Use toothpick or other soft tool to clean air cap holes. Some problems result from improper Loose, dirty, damaged nozzle/seat. Close restrictor valve some, or decrease air pressure as low as possible; minimum 40 psi (0. Open atomizing air valve more or increase gun air inlet pressure; use lowest air pressure necessary. Operator not grounded or is near ungrounded object. [. . . ] Graco makes no warranty, and disclaims all implied warranties of merchantability and fitness for a particular purpose in connection with accessories, equipment, materials or components sold but not manufactured by Graco. These items sold, but not manufactured by Graco (such as electric motors, switches, hose, etc. ), are subject to the warranty, if any, of their manufacturer. Graco will provide purchaser with reasonable assistance in making any claim for breach of these warranties. [. . . ]