User manual GRACO PRO XS4 AA

[. . . ] Do not use equipment until you identify and correct the problem. eliminate all ignition sources; such as pilot lights , cigarettes , portable electric lamps , and plastic drop cloths (potential static arc). Do not plug or unplug power cords or turn lights on or off when flammable fumes are present. Keep work area free of debris, including solvent, rags and gasoline. [. . . ] Connect gun air hose ground wire to true earth ground. All persons entering spray area must wear personal grounding straps or shoes with leather soles. Do not wear shoes with rubber or plastic soles. Conductive gloves are supplied with the gun. However, if non-Graco gloves are worn, cut off fingers or palm area of glove, to ensure your hand contacts grounded gun handle. Ground all fluid and waste containers, and all other conductive objects in spray area. Keep workpiece hangers clean and grounded. Floor of spray area must be electrically conductive and grounded. Do not cover floor with cardboard or any non-conductive material. Follow steps 1-22 to setup gun for spraying. Examine particle size in center of pattern (tails will be removed in step 18). Continue increasing pressure until particle size remains constant. Set gun air regulator to deliver minimum 40 psi (0. Turn atomizing air adjustment valve counterclockwise until tails disappear. Follow steps 1-7 below when using gun first time, changing colors, before fluid dries, at end of day, and before storing gun. Change fluid source to solvent, or disconnect fluid line and connect solvent supply line to gun. Flush until clean solvent flows from gun. Follow steps 1-8 when you stop spraying and before cleaning, checking, or repairing equipment. If gun or hose is completely clogged or pressure is not fully relieved, slowly loosen hose end coupling. Follow steps 1-3 at end of workshift and before cleaning, checking, or repairing equipment. Clean outside of gun with non-conductive, compatible solvent. Clean air cap/tip guard and spray tip with soft brush and non-conductive, compatible solvent. [. . . ] Graco makes no warranty, and disclaims all implied warranties of merchantability and fitness for a particular purpose in connection with accessories, equipment, materials or components sold but not manufactured by Graco. These items sold, but not manufactured by Graco (such as electric motors, switches, hose, etc. ), are subject to the warranty, if any, of their manufacturer. Graco will provide purchaser with reasonable assistance in making any claim for breach of these warranties. [. . . ]