User manual GRANDSTREAM GXV3615W DATASHEET

[. . . ] 18 Figure 5: Flow Chart of Key Pad Configuration Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Figure 6: Screenshot of Configuration Login Page. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Figure 7: Screenshot of Advanced User Configuration Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Figure 8: Screenshot of Reboot Page. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If configured to YES, the video phone can be turned to a video surveillance camera once the phone rebooted. This is the port for the video surveillance camera data stream. This field defines the layer 3 QoS parameter. It is the value used for IP Precedence or Diff-Serv or MPLS. This contains the value used for layer 2 VLAN tag (802. 1q and 802. 1p). User can press SEND key (or # key if configured) to overwrite the 4 seconds value to speedup dialing This parameter allows users to configure the "#" key as the "Send" (or "Dial") key. If set to "Yes", the "#" key will immediately send the call. In this case, this key is essentially equivalent to the "(Re)Dial" key. If set to "No", the "#" key is included as part of the dial string. This parameter defines the local RTP-RTCP port pair used to listen and transmit. When configured, for audio, channel 0 will use this port _value for RTP and the port_value+1 for its RTCP; channel 1 will use port_value+4 for RTP and port_value+5 for its RTCP. End user should NOT touch these parameters. Choose "Yes" to enable automatic HTTP upgrade and provisioning. In "Check for upgrade every" field, enter the number of minutes to check the HTTP server for firmware upgrade or configuration changes. When set to "No", the phone will only perform HTTP upgrade and configuration check once at boot up. Some other selections can be used to fine tune this process, it is self explainable. Authenticate Conf File Screen Saver Download Phonebook XML Download DTMF Payload Type Authenticate configuration file before acceptance. This is the path for screen saver image downloading. It may or may not be the same path as the firmware or configuration server. User can adjust based on own network environment. This is the path for XML based phonebook to be downloaded into the phone. User can use TFTP or HTTP to download the phonebook. User can also select whether to overwrite the manually inputted phonebook records in the flash. [. . . ] Go to Settings ->Preferences ->Input/Codecs ->Demuxers ->H264. Check "Advanced Options" on the bottom. Change "Frames per Second" value to 5 and then save. Go to Settings ->Preferences ->Input/Codecs ->Access modules ->Real RTSP. [. . . ]