User manual GRASS VALLEY 8960DEC DATASHEET

[. . . ] [. . . ] amp controls for luma, black, chroma, and hue · EDH insertion to track signal errors · Frame sync/delay submodule for low-cost system timing · Picture positioning adjustments · Reference signal inputs with removable terminations to allow looping · Built-in test signal generator · Remote control via frame Ethernet I/F Loopthru Featuring 12-bit A-to-D and adaptive decoding, the 8960DEC provides broadcast-quality serial component digital video to help transition from an analog to a digital facility. A unique capability of the 8960DEC is that by adding the 8900FSS frame sync sub-module you get a full frame synchronizer or a frame delay. 8900V-R SDI Output SDI Output Delay Data 625 Reference Input J1 J2 SDI Output SDI Output J3 J4 J5 J6 Not Used 525 Reference Input NTSC/PAL Input J7 J8 J9 J10 SDI NTSC/PAL Loopthrough Analog Filter 12-bit ADC Decoder Test Signal 10-bit SDI Generator EDH Insertion Local Controls LEDs Reference Microprocessor Optional Frame Sync Submodule RS-232 Audio Delay Remote Specifications Supported Frame Types GeckoFlex with 8900V-R GeckoFlex Video rear module, Gecko video frames: 8900TX-V, 8900TF-V, 8900TFN-V Return loss: >15 dB to 270 MHz Rise/fall times: 700 to 900 ps (20% to 80% amplitude) Ordering Information This module can be mounted in a GeckoFlex frame when ordered with the 8900V-R GeckoFlex Video rear. Power Rating 6. 5 Watts ­ single slot Performance Quantization: 12-bit Processing accuracy: 10-bit Luma frequency response: ±0. 1 dB to 5. 5 MHz Chroma (r-Y, B-Y) response: ±0. 5 dB to 1. 3 MHz Chroma/luma delay: <10 ns Luma non-linearity: <0. 15% Signal-to-noise ratio: >60 dB to 5. 5 MHz Electrical length: One line + 2 µs V blanking: Passed or blanked user-selectable dataline processing Operating temperature: 0° to 45°C, ambient Relative humidity: 0% to 90% non-condensing 8960DEC NTSC/PAL to SDI decoder Input Signal type: Compositeanalogvideo;SMPTE170M for NTSC and CCIR624 for PAL Connector: High Z differential loop-through BNC Return loss: >40 dB to 5. 5 MHz CMR: 60 dB @ 50/60 Hz Reference Input Number of inputs: Two Signal type: SMPTE 170M (525 lines) or CCIR624 (625 lines) Connector: BNC Impedance: 75 or High Z (jumper-selectable) allows external looping Return loss: >40 dB to 5 MHz Indicators and Controls Indicators: Input video present, fault, power, line rate Controls: Input video gain, luma level, black level, chroma level, hue, filters, vertical blanking, test signal, output timing (w/8900FSS) Remote: All controls and indicators via Ethernet For detailed specifications, installation, and setup instructions see: www. grassvalley. com/docs/modular Output Number of outputs: Four Signal type: Serial component digital video conforming to SMPTE 259M Connector: 75 BNC [. . . ] [. . . ]