User manual GRASS VALLEY EDIUS 6 LICENSE MANAGER APPLICATION NOTE 11-2010

[. . . ] insert the eDiUS USB license Key that you transferred the license from (note: You can only transfer the licenses back to the original USB license Key that they came from. ) 2. Select all the licenses that you have in the pc column (Shift + top and bottom license) 4. Select the arrow on the middle pointing to the left (bottom arrow) 5. the licenses will transfer, during this process both screens will grey out 6. [. . . ] exe is open 4 www. grassvalley. com EDIUS 4/5/6 LIcEnSE ManagEr (EDIUSLM. ExE) Merging Licenses (cont. ) 9. insert your eDiUS USB license Key for which you wish to have the additional license installed 10. Your additional license will no longer be greyed out so you can transfer it 11. Select the license from the license list column 12. Select the arrow pointing to the left (bottom arrow) 13. the license will transfer, during this process both screens will gray out 14. You can close the ediuslM. exe tool Important Notes: · if your eDiUS USB license Key is damaged, you will loose your additional license. please make note and advise any support teams about what licenses are on your USB license Key. We strongly recommend taking a print screen of the license list you have. · in my example, you will see i have transferred procoder 3 license, this is only possible with procoder 3 as earlier versions of procoder use a different type of USB license Key. · You can use this process to merge eDiUS license versions so you have one USB license Key for all your eDiUS 4, 5, and 6 licenses, but this may not be supported if damaged. www. grassvalley. com 5 EDIUS 4/5/6 LIcEnSE ManagEr (EDIUSLM. ExE) Troubleshooting We will often ask you to use the ediuslM. exe tool to troubleshoot problems with your licenses. if you try to open your eDiUS program and are faced with an error such as: it indicates a potential problem with your eDiUS USB license Key. this guide will show you some of the common errors you will see. insert your eDiUS USB license Key into the pc before troubleshooting, double click the ediuslM. exe icon. please see the different results below to find your next step: Error 7 ­ Will either mean that the USB license Key is not connected, the driver has not been installed correctly, or there is a hardware problem with the USB license Key. there is an leD light inside your USB license Key. please check the USB leD: leD off = Hardware problem leD Flashing/constant = Driver issue or hardware problem, please reinstall the HASp driver from your current version of your eDiUS installation DVD. RMA Procedure: 1. contact your Grass Valley Authorized Reseller/Distributor to arrange an RMA 2. the eDiUS USB license key will need to be sent in for repair 3. Your distributor will need to send the USB license Key to Grass Valley, so please request a turn-around time when making your RMA request 6 www. grassvalley. com EDIUS 4/5/6 LIcEnSE ManagEr (EDIUSLM. ExE) Troubleshooting When the eDiUS USB license key is inserted and the ediuslM. [. . . ] if for any reason your eDiUS/ procoder USB license Keys are lost or stolen, it will not be covered by warranty. We do not have any discounts for replacing the license. You will need to contact your authorized Grass Valley reseller to purchase a new copy at full price. if you have your eDiUS/procoder USB license Key covered by your insurance (depending on your policy) you can file a claim for the cost of the new license (subject to any policy deductibles). if you do not have a version shown, this is most likely for eDiUS 4. [. . . ]