User manual GRUNDIG DSR 3410 CI

[. . . ] DIGITAL SATELLITE RECEIVER DSR 3410 CI DEUTSCH ENGLISH FRANÇAIS ITALIANO CONTENTS ____________________________________________ 4 4 4 4 5 5 General information Packing contents GRUNDIG accessories for satellite receivers Digital satellite reception Special features of your digital receiver What is Common Interface? 6 7-9 7 8 9 Set-up and safety Overview The front of the digital receiver The back of the digital receiver The remote control 10-11 10 10 10 11 11 11 11 Connection and preparation Connecting the satellite antenna Connecting the television Connecting a video recorder Connecting a hi-fi system Connecting a digital multi-channel amplifier Connecting the power cord Inserting batteries in the remote control 12-21 12 13 14 15 16 17-18 18 19 20-21 Settings The menu Assigning preset stations Editing the station list Editing the list of favourite stations Setting the local time Adjusting the digital receiver to the television set Encrypted satellite reception Adjusting the digital receiver to the LNB configuration of the satellite antenna Audio settings 22-24 22 22 22 22 23 23 23 24 24 Basic functions Switching on and off Mode selection Selecting preset channels Adjusting the volume Muting the sound Selecting stations from lists Switching from the current station to the previous one TV Guide Subtitles 25-30 25 25 26 26 27 28 29-30 Additional functions Setting the menu language Deleting stations automatically Preset satellite stations Automatic station search Manual station search Selecting the video channel Timer functions 2 CONTENTS _________________________________________________ 31 31 31 Special settings Resetting the digital receiver to its original state Updating the digital receiver software 32-34 32 32 32 33 34 Information Displaying station reception properties Displaying device information Connecting the digital receiver to a PC Technical data Troubleshooting ENGLISH 3 GENERAL INFORMATION __________________ Packing contents 1 2 3 4 5 6 DSR 3410 CI Digital Satellite Receiver Tele Pilot 765 S remote control Two batteries for the remote control (2 x 1. 5 V, Mignon, e. g. UM-3 or AA) Euro/AV (Scart) cable Power cord Operating manual GRUNDIG accessories for satellite receivers Your specialist dealer will be happy to tell you about the comprehensive range of GRUNDIG accessories for satellite receivers. Digital satellite reception In order to use your new DSR 3410 CI digital receiver you need a digital-compatible satellite antenna, which must be installed and aligned to the required satellites (for example Astra and EutelSat/Hotbird). Unlike analogue satellite broadcasting, digital TV or radio stations are not all assigned their own frequencies; instead, several TV and/or radio are "transmitted" by a single transponder. To help you with the choice and settings for satellite stations, a selection of TV and radio stations have already been programmed for you. [. . . ] Enter the required value using »1 . . . To set the oscillator frequency for the HIGH band, select this item and press »OK« to confirm. Enter the required value using »1 . . . If you want to receive up to four satellites simultaneously, each LNB must be assigned to its input on the DiSEqC switch. If you want to receive two satellites at the same time, each LNB is assigned to its input on the tone burst switch. Select and open Back 2 3 Antenna connection LNB LNB supply LOW band HIGH band DiSEqC switch Tone burst switch 1 Astra 19. 2 On 9. 750 GHz 10. 600 GHz A A Select and open Back Exit ­ »HIGH band«: ­ »DiSEqC switch«: ­ »Tone burst switch«: 4 5 Press »i« and then »OK« to save the settings. Press »i« to finish the setting. 19 ENGLISH SETTINGS _________________________________________________ Audio settings Sound Sound channel TV Sound settings Volume adjustment Sound channel Dig. English Stereo s 1 2 In the main menu, select »Settings« with »P-« or »P+« and press »OK« to confirm. Select »Sound« by pressing »OK«. ­ The »Sound« menu appears. Note: Further operation is explained in the following sections. s s s s s s s Same as TV Select and open Back Exit Changing the audio channel of the television Sound Sound channel TV Sound settings Volume adjustment Sound channel Dig. English Stereo s s s s s s s s Here you can find information on the number of audio channels (i. e. the language of the current TV or radio program). You can switch to a different language during programs broadcast in several languages. In radio mode, you can switch to other programmes. 1 2 Select »Sound channel TV« with »P-« or »P+« and then press »OK«. Press »P-« or »P+« to select the setting and press »OK« to confirm. Same as TV Select and change Back Sound settings Sound Sound channel TV Sound settings Volume adjustment Sound channel Dig. English Stereo Deutsch Mono (left) s Mono (right) Same as TV Here you can select the audio mode, such as stereo, mono (left) and mono (right). 1 2 Select »Sound settings« by pressing »P-« or »P+« and press »OK« to confirm. Press »P-« or »P+« to select the setting and press »OK« to confirm. s s s s s s s Select and change Back Volume adjustment Sound Sound channel TV Sound settings Volume adjustment Sound channel Dig. English Stereo s You can set the standard volume here. This is the volume of the device after switching on. 1 ss s s s s s s s Select »Volume adjustment« by pressing »P-« or »P+« and press »OK« to confirm. [. . . ] Select »Info« with »P-« or »P+« and press »OK« to confirm. Select »Reception parameters« with »P-« or »P+« and press »OK« to confirm. ­ The »Reception parameters« menu appears. In the »Reception parameters« menu, press »P-« or »P+« to change stations. [. . . ]