User manual GRUNDIG GDT 310

[. . . ] 35 IMPORTANT SAFETY INSTRUCTIONS 36 36 36 36 INSTALLING YOUR PHONE Package contents Connecting the base station Installing and charging the batteries 50 CALLER DISPLAY 50 View the Call List 50 Store a Call List Number into the Phonebook 50 Delete an entry in the Call List 51 Delete the entire list of the Call List 51 View the Details of the Call List Entry 52 VOICE MAIL 52 Access Voice Mail Messages 52 Delete VMWI Entries 53 53 54 55 57 59 59 PHONE SETTINGS Date and Time Settings Alarm Settings Handset Settings Base Settings Registration Reset Your Phone When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following: 1 Read and understand all the instructions. 2 Follow all warnings and instructions marked on the product. 3 Unplug this product from the wall outlet before cleaning. 4 Do not use this product near water (for example, near a bath tub, kitchen sink, swimming pool). [. . . ] In keypad lock mode, press and hold » « to turn off the keypad lock. You can redial up to 5 of the last numbers called. If you have stored a name in the phonebook to go with the number, the name will be displayed instead. This feature is only applicable when there are at least two registered handsets. It allows you to make internal calls, transfer external calls from one handset to another handset and make conference calls. If the called handset is not answered within 60 seconds, the called handset will stop ringing and the calling handset will return to standby mode. Note: If only one handset is registered to the base station, press » « will display "NOT POSSIBLE" Intercom Another Handset 1 In idle mode, press » « and the registered handsets will display except the calling handset. 2 Enter the desired handset number to intercom with. 3 The called handset rings and press » «on the called handset to establish the internal call. Note: If two handsets are registered to the base station, press » « will connect to another handset immediately. You can stop the paging by pressing » «/ » « / » « / » « on any handset or » « on the base again. Note: If there is an incoming call during paging, the phone will ring with the incoming call instead of paging. 3 The external call is put on hold automatically and the called handset rings. 4 Press » «on the called handset to establish an internal call. 5 Press » « on the calling handset or put the calling handset on the charging cradle to end the current call with the external party. 6 The external call is transferred to the called handset. Make a 3-way Conference Call The conference call feature allows one external call to be shared with two handsets (in intercom). The three parties can share the conversation and no network subscription is required. During an external call: 1 Follow Steps 1 to 4 in section Transfer an External Call to another handset 2 Press and hold » « on the calling handset to establish the conference call. Nate: Any handset hangs up during a conference call will leave the other handset still in connection with the external call. Your phone can store up to 20 private phonebook entries with names and numbers. Each phonebook entry can have a maximum of 20 digits for the phone number and 12 characters for the name. [. . . ] During paging or ringing, the alarm will not sound when the alarm time is reached. Note: If the new PIN entered in Step 6 is not matched with the new system PIN entered in Step 5, user is requested to enter the valid system PIN again in Step 5. Up to five handsets can be registered to a single base station. If for some reason, the handset is not registered to the base station ( » « flashes even when the handset is near the base station), register your handset according to the following procedure. [. . . ]