User manual GRUNDIG GPF 6870

[. . . ] DIGITAL PICTURE FRAME GPF 6870 CONTENTS-----------------------------------------------------------------------------------------------4 5 5 5 SETUP AND SAFETY GPF 6870 Special features Packing contents 6 6 7 9 OVERVIEW The front of the digital picture frame The rear of the digital picture frame The remote control 11 11 11 12 14 15 16 17 17 18 CONNECTION AND PREPARATION Removing the protective foil Setting up the digital picture frame Wall mounting Inserting the battery Connecting the power supply unit Inserting the data medium Inserting a USB memory stick or connecting a multimedia player Connecting earphones or headphones Changing the front bar 20 20 20 20 INITIAL SETUP Switching on the digital picture frame Selecting the screen menu language Setting the date and time 21 21 21 21 21 22 22 23 GENERAL FUNCTIONS General information Switching on and off Adjusting the volume Selecting options in the main menu (without data storage medium) Selecting the type of playback Screen settings Calendar function 24 24 26 PICTURE PLAYBACK Picture playback ­ basic functions Picture playback ­ menu functions 28 28 28 28 MUSIC PLAYBACK Starting music playback Playback functions Muting the loudspeaker 2 CONTENTS-----------------------------------------------------------------------------------------------29 29 29 FILE LIST File list ­ general File list ­ functions 30 30 31 31 PREFERENCES Setting the switch-off timer Setting the alarm Restoring the digital picture frame to default settings 32 32 32 INFORMATION Technical data Environmental note ENGLISH 3 SETUP AND SAFETY -------------------------------------------------------------The device is designed to play picture and audio signals. The device is designed for use in dry rooms. If you do use it outdoors, make sure it is protected from moisture such as dripping or splashing water. If the device is exposed to sudden changes in temperature, for example when taken from the cold into a warm room, wait at least two hours before using it. [. . . ] 2 Press »8« on the device to switch the digital picture frame to standby. or 1 Press » « on the remote control to switch the digital picture frame on from standby. 2 Press » « on the remote control to switch the digital picture frame to standby. 8 8 Adjusting the volume 1 Press »VOL +« or »VOL ­« on the remote control to adjust the volume during playback; or adjust the volume on the device using »a« or »s«. Selecting options in the main menu (without data storage medium) 1 1 Press »MENU« to open the main menu. ­ Two symbols appear: ­ »Setup«: system and playback settings. ­ »Calendar«: yearly calendar. The correct settings for the date and time must be made before these can function. Setup 2 Select the symbol using »a« or »s« and activate using »OK«. Note: Prerequisite for playback mode (pictures and music) is a data medium which contains the data required. After inserting the data medium a further selection symbol appears in the main memory menu: »SD/MMC« (memory card) or »USB« (removable storage medium). ENGLISH 21 GENERAL FUNCTIONS ---------------------------------------------------Selecting the type of playback 1 This requires that a data medium has been inserted. 1 Press »MENU« to open the main menu. »SD/MMC«, by pressing »a« or »s« and activate using »OK«. SD/MMC 1 3 Select the type of replay by pressing »a« or »s« and activate using »OK«: ­ »Music«: music playback. ­ »Photo«: picture playback. ­ »File«: List of all files in the memory which are able to be played back. File Screen settings You can set the brightness and colour saturation of the screen as required. 1 OSD language Change picture Picture transition Picture format Date/Time Alarm Switch-off time Brigthness English 3s Random Normal 2008 09 26 10:14 00:00 Off 00:00 Off 8 1 Press »SETUP« to open the »Setup« menu. 2 Press »S« or »A« to select the »Brightness« menu item. 3 Set the level (0 to 16) by pressing »a« or »s« and confirm using »OK« 4 Press »S« or »A« to select the »Contrast« menu item. Note: The menu item »Contrast« is located on the second menu page. To select that menu item, press »S« as often as required. 5 Set the level (0 to 16) by pressing »a« or »s« and confirm using »OK« 6 Press »S« or »A« to select the »Saturation« menu item. 7 Set the level (0 to 16) by pressing »a« or »s« and confirm using »OK«. 8 Press »SETUP« to exit the menu. s 1 s Contrast Saturation Factory defaults 8 8 22 GENERAL FUNCTIONS ---------------------------------------------------Calendar function If you select the »Calendar« symbol in the main menu, the current month with the current date and time will appear. At the same time, a slide show runs as inset pictures. The correct settings for the date and time must be made before the calendar can work. 1 07 October 2008 MonTue WedThu Fri Sat Son 1 6 13 20 27 7 & 8 15 22 29 2 9 16 23 30 3 10 17 24 31 4 11 18 25 5 12 19 26 1 Press »MENU« to open the main menu. [. . . ] The correct settings for the date and time must be made before the alarm can work. 1 Press »SETUP« to open the »Setup« menu. 2 Press »S« or »A« to select the »Alarm« menu item. 3 Press »s« to activate the hour setting. [. . . ]