User manual GRUNDIG GWT 2000

[. . . ] Make sure that the equipment is protected from moisture (dripping or splashing water), sunlight and heat. Do not expose the batteries to extreme heat, caused for example by direct sunlight, heaters or fire. Note: Do not use the player if you are a motorist, cyclist or pedestrian etc. This product has been made from high-quality parts and materials which can be re-used and recycled. [. . . ] ­ »Delete«: navigate within internal memory, delete files. 2 Select the desired operating mode with » « or » « and activate with » 2 Select the desired operating mode, such as »Music«, with » « or » « and activate with » «. 5 Select the desired setting with »+« or »­« and confirm with » «. 6 Go back one menu level by briefly pressing » «; or Briefly press »FUNC« to return to the playback menu. 2 Select the desired starting time for the key lock (»10 Sec«, »30 Sec«, »1 Min«, »3 Min«, »5 Min« or »Off«) with »+« or »­« and confirm with » «. ­ The key lock is activated automatically after the time selected has elapsed, if no key is pressed in the meantime. ­ If you then press a button, a large icon appears briefly in the display to remind you of the key lock. 3 Deactivate the key lock by pressing and holding » « for about one second. In the event of a malfunction during operation or if the player no longer responds to key commands, you can reset the player. 1 To reset the device, use a pointed object such as a paper clip to press »RESET«. Note: When resetting, the player should not be connected to the computer or the USB charging device. 1 To set the frequency you want, press » « or » « as often as necessary. Or Start the search by pressing » « or » « until »Searching . ­ The search stops when a station with a strong signal is found. Storing with the automatic station search (Auto Scan) 1 Open the FM menu by briefly pressing »FUNC«. 2 Select the »Auto Scan« option with »+« or »­« and activate with » «. ­ The automatic station search begins and saves up to 30 stations with the best reception as presets. ­ The current radio station is saved on the next preset. The player switches to preset mode and the occupied preset, »CH 15« for example, is displayed. ­ The radio station saved on the selected preset is deleted, and the ones behind it all move forward by one preset. 2 Select the »Record« operating mode with » « or » « and activate with » «. 1 To open the menu when playing back a recording, briefly press »FUNC«. [. . . ] Notes: If »Device Full« appears in the display while it is recording, the flash memory is full. The recording then stops and the file is saved automatically. « appears while it is recording, the battery is running low. The recording then stops and the file is saved automatically. [. . . ]