User manual GRUNDIG LC 800 C

[. . . ] Switches the display between frequency or station name and time with week day. Adjusts the brightness of the display to one of three levels, switches off the backlight for the display. Switches between eight different colours for the display backlight. Note: Check that the mains voltage on the type plate (on the bottom of the device) corresponds to your local mains supply. [. . . ] Please dispose of used batteries in an environmentally sound manner. Find out about the legal regulations which apply in your area. When the device is connected to the mains for the first, time, an automatic station search starts. Stations are automatically saved to the presets. The station saved on preset position 1 can be heard. if the device receives a station that transmits an RDS time signal , the time and the week day are set automatically , (RDS time synchronisation). If the device could not execute the automatic station search as well as the automatic time/week day setting due to poor reception conditions, for example, you have to make the settings manually or select a different station. Automatic station search 1 Press »ON/OFF« to switch on the device from standby mode. ⭠Display: the frequency band and frequency , or station name. 2 Activate the station search by pressing » TUNING« or »TUNING « until the frequency display changes to rapid run-through forwards or backwards. ­ The search stops when a channel is found. The automatic setting is always activated if the device is switched on from standby to radio mode and a suitable RDS station can be received. Searching for programme types (PTY) This RDS function enables you to search radio stations according to programme type. ­ If the desired programme type has been found, the corresponding programme can be heard. ­ If the programme type could not be found, »NO MATCH« appears briefly in the display. the device returns to the previous station. Note: The search can be interrupted with » TUNING« or »TUNING «. The device has a dynamic alarm sound, that starts with a low volume and reaches maximum volume within a short time. Alarm with radio station 1 Press »ON/OFF« to switch on the device from standby mode. 4 Activate the radio station as the alarm sound (» «) by pressing »ALARM1« or »ALARM2« repeatedly until the display shows: » » 2«. 5 Press »ON/OFF« to switch the device to standby. ­ The device wakes you up at the set time with the radio station (alarm duration is 90 minutes). [. . . ] Activating the sleep timer 1 Set the desired switch-off time progressively by pressing and holding down »SLEEP/NAP« or in steps by pressing the button repeatedly. Deactivating the sleep timer 1 To switch off the sleep timer early, press »ON/OFF«; or Set the switch-off time to »SLEEP 00« by pressing »SLEEP/NAP«. The reminder timer reminds you after a certain time (between 10 and 120 minutes) with a signal tone. Notes: The remaining reminder time can be displayed with »SLEEP/NAP«. [. . . ]