User manual GRUNDIG LE 7940

[. . . ] Any other use is expressly prohibited, particularly for the removal of hair on the head. Do not immerse the appliance in water. 7 7 7 7 7 7 Only use the KG3B-030-1000D power supply unit provided. Disconnect the power supply unit after use or charging. Never use the appliance if it or the power supply unit show signs of damage. 7 7 7 7 7 18 ENGLISH SAFETY -----------------------------------------------------------------------------------------------------------------------------------7 The appliance may not be used by the following people, including children: those with limited physical, sensory or mental capabilities and also those with a lack of experience and knowledge. [. . . ] 1 Insert the power cord into the socket F on the appliance. 2 Plug the power supply unit into the power socket. I 22 ENGLISH USE -------------------------------------------------------------------------------------------------------------------------------------------------Trimming/shaving hair If you want to epilate hairs which are longer than 10 mm, it is advisable to trim these with the shaving head beforehand. Caution 7 The shaving head can only be used with speed setting »1«. 1 Press the button the appliance. D 3 Attach the shaving head H and press it down until it latches in place. to switch off 2 Remove the epilator head B . To do this, press the side catches 4 Insert the power cord into the C and take off the epilator socket F on the appliance head with the other hand. and plug the power supply unit I into the mains socket. 5 Switch the appliance to position »1« using D . 6 Trim hairs by moving the appliance gently over the parts of skin. ENGLISH 23 USE -------------------------------------------------------------------------------------------------------------------------------------------------Hair removal To achieve best results, take a warm bath or shower to open the pores. This way your skin will be clean and smooth and thus in the best condition for epilating. Make sure your skin is clean, not greasy and completely dry before epilating. 1 Remove the protective cap from the appliance. 2 Press the button the appliance. D A Warning 7 Do not use the appliance on moles or birthmarks. Birthmarks should never be scratched, ruptured or depilated. If this is the case, your health could be at risk. 4 We recommend holding the appliance in your hand at a 100° angle to your skin. Do not exert any pressure, just touch the skin. to switch on 3 Adjusting the speed. ­ Low (»1«) for fine hair. ­ High (»2«) for coarser hair. 24 ENGLISH USE -------------------------------------------------------------------------------------------------------------------------------------------------5 Use short, circular movements as if you were brushing or wiping ­ in the direction the hair grows. 7 You can also remove hairs on your thigh or bikini area. 8 You can remove individual hairs on your top lip or cheek. 9 Hold out your arm to stretch the skin when removing armpit hairs. Note 7 If you have not removed the hairs from your bikini area or under your armpits for a longer period, start by trimming them with the replaceable shaving head H . [. . . ] 2 Ensure that the epilator head and the shaving head are completely clean. 3 Store the appliance, the shaving head and the power supply unit in a cool, dry place. 4 Make sure the appliance is kept out of reach of children. 5 Clean the bottom of the shaving head with the cleaning brush supplied J . 6 Insert the blade foil in the shaving head again. [. . . ]