User manual GUDE GHD 165

[. . . ] Read and understand the operating instructions before using the appliance. Familiarise with the control elements and how to use the appliance properly. Abide by all the safety measures stated in the service manual. The operator is responsible for accidents or risks to third parties. [. . . ] Protect the injuredyou seekfrom furtherthe harm and calm them down. Type(s) WARNING The spray gun of the Symbols pressure washer recoils as the stream of water shoots out. That you take a solid stance, and hold the spray gun and jet pipe WARNING - Read the operating instrucfirmly. The pump must not in any case run Wear eye protective goggles !Check the cable and/or socket for Unplug the machine before any work damages before the appliance puton it. Do not expose the appliance to rain EN D ENGLISH Warning against dangerous electric voltage The stream should not be directed at people, active electrical equipment or towards the machine itself. Any damaged or disposed electric or electronic devices must be delivered to appropriate collection centres. In accordance with the valid regulations, this device must never be operated on the drinking water network without a backflow preventer. A suitable backflow preventer that is compliant with EN 12729 Type BA must be installed. Water that has passed through a backflow preventer is classified as unfit for drinking. Protect the feeder cable from excessive temperatures, oil and sharp edges. 17 Maintenance Unplug the machine before any work on it. Before using the appliance, perform a visual inspection at all times to make sure the power cord and the plug, in particular, are not damaged on the charger. The appliance must not be used if damaged or safety equipment is defective. If the power cord of the appliance gets damaged, it must be replaced by the manufacturer or its customer service or a similarly qualified person to avoid danger. Repairs and works specified in these Instructions may only be performed by qualified authorised staff. Use only original accessories and original spare parts. Only a regularly maintained and treated appliance can serve as a satisfactory aid. insufficient maintenance and care can lead to unforeseen accidents and injuries. If necessary, a list of spare parts can be found at www. Through poor conditions of the electrical MAINS, shortly voltage drops can appear when starting the EQUIPMENT. (In case of need, you may contact your local supply authority for further information). [. . . ] You can get quick and unbureaucratic assistance in the Service section on the homepage of our service partner Güde GmbH & Co. In order to be DE EN D 18 able to identify your device in the case of a complaint, our service partner will require its serial number, article number, and year of manufacture. All this information can be found on the nameplate. Com Failure removal Failures Engine does not start Causes Plug is not connected Outlet is defective Fuse has blown Extension cord is damaged Fuse has blown Mains voltage is wrong Nozzle is partly blocked There is air in the water hose or in the pump Water supply is wrong Water filter is blocked Water hose is compressed or kinked Nozzle is worn-out Water is not connected Filter is blocked Pump or spray gun is leaking Device is still working at high pressure Removal Connect plug Use another outlet Change the fuse Try it without the extension cord Replace the fuse Check the mains voltage; it must be in line with what is on the label Clean the nozzle Shut off the pressure washer and allow the spray pistol and the tap to run freely until an even operating pressure develops Check if the water supply is in line with the requirements laid out in the technical specifications. [. . . ]