User manual HAIER 21H5FT-ME

[. . . ] Do not place the TV set near rain or moisture as it may cause an electric shock, or the TV set to catch fire. The TV set must only be Used in dry indoor location. 2. In order to prolong the using life of the TV set, please place it at a well ventilated location. 5. The back cover must only be removed by a registered electrical service person. [. . . ] [VOL-] button is to search the program from high FC. Repeat above procedure until you find the channel you need. TUNING POSITION BAND SKIP SEARCH MFT AUTO MEMORY 01 VL OFF DOWN UP 49. 87 MHZ SELECT ADJUST TUNING POSITION BAND SKIP SEARCH MFT AUTO MEMORY 01 VL OFF DOWN UP 49. 87 MHZ SELECT ADJUST 4. When you intend to memory another channel in another position, press [-CH+] buttons to select POSITION, and use [-VOL+] buttons to select a number you need, then press [-CH+] buttons to select SEARCH, and repeat forth procedure. TUNING POSITION BAND SKIP SEARCH MFT AUTO MEMORY 01 VL OFF DOWN UP 49. 87 MHZ SELECT ADJUST 8 TUNING PROCEDURE Skip After pre-tuning the channel, you can skip the channel you do not need in order to only select the channel you want to watch. 1. Press [-CH+] buttons or numeric button(0~9) to select the channel number skipped(for example: channel 1). 2. Press [MENU] button to let TUNING menu display on the screen, then press [-CH+] buttons to select SKIP item. 3. Press [-VOL+] buttons to set SKIP ON mode. 4. Press [DISPLAY] button to shut off the menu. The channel number will be skipped when you use[-CH+] buttons to select channels. But you can still use numeric button to select the channel number skipped. Note: 1. You can use the numeric button to select the channel number that need recover. 2. Press [MENU] button to let the TUNING menu appear on the screen, then press [-CH+] buttons to select SKIP. 3. Press [-VOL+] buttons to set SKIP OFF mode. TUNING POSITION BAND SKIP SEARCH MFT AUTO MEMORY 01 VL OFF DOWN UP 49. 87 MHZ SELECT ADJUST TUNING POSITION BAND SKIP SEARCH MFT AUTO MEMORY 01 VL OFF DOWN UP 49. 87 MHZ SELECT ADJUST TUNING POSITION BAND SKIP SEARCH MFT AUTO MEMORY 01 VL OFF DOWN UP 49. 87 MHZ SELECT ADJUST 9 TUNING PROCEDURE Fine tuning Because of some reasons, if auto searching effect of program isn't good, please fine tune your TV set. 1. Press [-CH+] buttons or numeric button(0~9) to select the channel number that need to fine tune. ( For example: channel1) TUNING 2. Press [MENU] button to let main menu display on the screen, then press [-CH+] buttons to select MFT item. POSITION BAND SKIP SEARCH MFT AUTO MEMORY 01 VL OFF DOWN UP 49. 87 MHZ SELECT ADJUST 3. Press and hold [-VOL +] buttons until the effects of the picture and audio are good. 1. Press [ ] button on the remote controller, the( ) will appear at the bottom of the screen, at this time the sound will be shut off. SELECT ADJUST 4. Press[-CH+] buttons to select POS 0 item, then press [-VOL+] buttons to set ON/OFF TIMER channel number(for example 5). 5. Press[-CH+] buttons to select CLOCK item, then TIMER ONCE press [-VOL+] buttons to set the current time(the OFF TIMER 19:00 method is the same as OFF TIMER, ON/OFF ON TIMER OFF 22:00 TIMER takes this clock as standard). POS 00 CLOCK APPOINTMENT SELECT 01:40 ADJUST 15 TIME FUNCTION Appointing program 1. Press [MENU] button to let the TIMER menu display on the screen. Press [-CH+] buttons to select CLOCK item, then press [-VOL+] buttons to set the current time( themethod is the same as OFF TIMER, APPOINTMENT takes this clock as standard). 3. Press [-CH+] button to select the APPOINTMENT item. Then press [ VOL+/-] buttons to enter APPOINTMENT sub-menu. 5. Press [CH-] button to enter TIME item. Then press [-VOL+] buttons to set the time. Pressing [-VOL+] buttons, the time will change with 1 minute unit. Pressing and holding [-VOL+] buttons, the time will change with 10 minutes unit. [. . . ] Press [-CH+] buttons to select POS. EX item, S. C. C OFF AUTO OFF OFF then press [-VOL+] buttons to enter POS. EX COUNT 0:38 sub-menu. ADJUST SELECT The digit of EX. POS1 and EX. POS2 item are the current position number. POS. EX EX. POS1 EX. POS2 EXCHANGE RETURN 01 01 3. Press [-CH+] buttons to select EX. POS2 item, then press [VOL+/-] buttons to input position number 9. POS. EX EX. POS1 EX. POS2 EXCHANGE RETURN 01 09 4. Press [-CH+] buttons to select EXCHANGE item, then press [VOL+/-] buttons to enter. At this time, the program of original position number 1 is exchanged to position number 9, the program of original position number 9 is exchanged to position number 1. 19 SETTING FUNCTION There is lock function in this TV set, you can select it to protect your TV set according to your need. Changing password The password of the TV set is preset "0000" in manufacture, if you want to change the password, you can fill in four digits. [. . . ]