User manual HAIER 42EP24STV

[. . . ] PLASMA TV OWNER`S MANUAL MODELS: 42EP24STV Please read this manual carefully and completely before operating the unit, and retain this manual for future reference. WARNING RISK ELECTRIC SHOOK DO NOT OPEN WARNING : To reduce the risk of electric shock do not remove cover or back. No user-serviceable parts inside refer service to qualified service personnel. Safety of operators has been taken into consideration at the design and manufacture phase, but inappropriate operation may cause electric shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of th product. Read the following safety instruction before starting the operation. [. . . ] Vivid: mode of watching the movement of picture. Mild: the effect of the picture is soft. Custom: picture effect which you favorite. Sleep Timer Every press of SLEEP button, the timer will be set in the following sequence: Sleep 0Min Sleep 5Min Sleep 15Min Sleep 30Min Sleep 60Min Sleep 90Min Sleep 120Min Sleep 0Min If remaining time of set timer is to be displayed, press the SLEEP button once. Owner s Manual 17 System Menu This TV set has three methods to set channels, which are respectively Automatic search, manual search In this section, how to use the remote control to set channel is explained. You can also use buttons on the TV set to set channel. fine tune. Channel Type Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i. e. , an antenna or a cable system). 1 Press MENU button and then use VOL+/- button to select the SYS. 2 Press CH+/- buttons to select "Channel Type" item. 3 Press VOL+ button to select Cable or Air item. When Air is selected, the TV will detect antenna signals and will search for antenna TV (NTSC and ATSC) channels available in your local area. When Cable is selected, the TV will detect cable company supplied signals and will search for cable TV (NTSC, ATSC, QAM modulated) channels available in your area. Make sure that registration with your cable TV provider and connection of equipment are completed. When Air and Cable are selected, the TV will detect the antenna signals and cable company supplied signals, and search for the antenna TV and cable TV channels available in your area. Color Sys. Fine Tune Skip Channel Type CATV Type Auto Scan Prog. Switch A B C AUTO M/N 49. 75MHz Off Cable STD Note : the tuning menu will be only operated in normal TV mode. CATV Type 1 Press MENU button and then use VOL+/- button to select the SYS. 2 Press CH+/- buttons to select "CATV Type" item. 3 Press VOL+ button to select STD, IRC or HRC item. Note: STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. Automatic Scan 1 Press MENU button and then use VOL+/- button to select the SYS. 2 Press CH+/- buttons to select "Auto Scan" item. 3 Press VOL+ button to ensure automatic search function work. 4 Press MENU button to stop automatic search function. After the search has finished, all channels now playing program will be automatically preset in order. Color Sys. Fine Tune Skip Channel Type CATV Type Auto Scan Prog. Switch A B C AUTO M/N 49. 75MHz Off Cable STD 18 Plasma TV System Menu Fine Tune If the picture and/or sound are poor, try using the fine tune feature. Do not use this feature unless reception is poor. Color Sys. Fine Tune Skip Channel Type CATV Type Auto Scan Prog. Switch A B C 1 Repeat step 1-2, then press CH+/- buttons to select "Fine Tune" item. AUTO M/N 49. 75MHz Off Cable STD 2 Press VOL-/+ buttons repeatedly to carry out fine tune, till the best picture and sound are obtained, then loosen the button. Color System Usually this should be set in the auto position. However if the color displayed on the screen are incorrect, you can manually select the correct color system. Press MENU and then VOL+/- button, till the picture menu shown on the right will display on the screen. Press CH+/- buttons to select "Color Sys. ", then press the VOL-/+ buttons to select the correct color system. In general, you can set it as "AUTO". Color Sys. [. . . ] Note: The setting of aspect ratio is respective in different signal source , that means different aspect ratio could be saved in different source - This function works in the following modes: RGB-PC, RGB-DTV (480p, 720p, 1080i), DVI-DTV (480p, 720p, 1080i), COMPONENT(480p, 720p, 1080i). Press Press Press Press Press MENU button and then use VOL+/- button to select the ADJ. VOL+/- button or enter button to enter the sub menu. CH+/- button to select one option and then press VOL+/- to adjust. [. . . ]