User manual HAIER HL22XSL2

[. . . ] LED HDTV Televiseur HD à ecran a DEL HDTV LED HL19SL2/HL19SLW2/HL22XSL2/ HL22XSLW2 OWNER'S MANUAL GUIDED'UTILISATION DEL TELEVISOR LED HDTV Please READ this manual carefully before operating your TV, and retain it for future reference. Veuillez lire ce guide attentivement et entièrement avant d'utiliser votre téléviseur, conservez ce guide pour vous y reporter ultérieurement. Se recomienda leer con atención este manual antes de poner en funcionamiento su televisor y conservarlo para consultas futuras. 01 0090509587 Warning CAUTION RISK ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. ! The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. ! The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. [. . . ] R Time shift record will store the fact of no signal. R Time shift will store the video, audio and data service. we only support: Video streams: Max 1 stream Audio streams: Max 8 streams CC stream: No limited. R In recording, the data is not guaranteed to be stored in the disk. If the timeshift playback plays a corrupted data block, it would show "Data lost" message to indicate that the current data is not stored correctly. R Please connect the TV antenna or Cable TV coaxial cable to the Antenna input on the TV. The Time Shift feature is available when using your ATSC tuner and QAM cable tuner. /Short and Long to change thetime of the OSD display. Y OSD Transparency: Press VOL+/- button to select among Low/High and Middle to change the transparency of the OSD. Y Screen Mode: Press VOL+/- button to select among Normal/Wide/Zoom and Cinema to change the display mode(display mode may differ from different inputs). When set On, the set will be put in standby mode automatically if there is no signal received for 2 minutes. Y Blue Screen: Press VOL+/- button to select On, the screen will be in blue after 3 seconds if there is no signal. Press VOL+/- button to select On or Off. Y Time Setup: Press VOL+/ ENTER button to enter the submenu. · Time Zone: Press VOL+/- button to select the appropriate time zone. Video Audio Channel Function Lock CH+/VOL+/- Function Menu Options A MENU button and CH+/- button until the Press following menu appears on the screen. Video Audio Language OSD Timeout OSD Transparency Screen Mode Blue Screen DCR Time Setup Closed Caption Default Select EXIT Back English Short Middle Normal On On On Time Zone Date/Time Sleep Timer Off Channel DPMS Function Lock Function Time Setup CH+/VOL+/- Select EXIT Back B VOL+/ ENTER button to enter the menu and Press CH+/- button to go up and down to select the desired option. · Date/Time: Press VOL+/ ENTER button to enter the submenu. Video Audio Auto Date Time On 2009/01/01 11:54 AM Off 11:54 AM 12:00 AM C VOL+/ ENTER button to confirm and VOL+/Press D Repeat step 2 and step 3 until desired quality has been achieved. button increase and decrease the level to adjust the selected option to your preference. Channel Timer Function Off Time Lock Date/Time On Time Function Y Language:Press VOL+/- button to select language of the OSD. Y OSD Timeout: Press VOL+/- button to select Middle CH+/VOL+/- Select EXIT Back Auto: Press VOL+/- button to select On or Off . When Auto mode on , the time can not be adjusted. Select Haier LED HDTV EN-14 Operation Off , you can operate to set the time manually. Date: Press VOL+/- button to select the position and digits button to set the date. Time:Press VOL+/- button to select the position and digits button to set the time. Timer: Press VOL+/- button to select On or Off . To select Off, the time can not be adjusted. [. . . ] Verify if the antenna is correctly connected. Verify if the antenna is in good condition. Check for local interference such as an electrical appliance or power tool. Disconnect the television from power supply and, 10 seconds later, connect the television to the power supply. [. . . ]