User manual HAIER HL26ATB

[. . . ] TFT-LCD TV OWNER ' S MANUAL Please READ this manual carefully before operating your TV, and retain it for future reference. MODEL S : HL26ATB HL32ATB CAUTION RISK ELECTRIC SHOCK DO NOT OPEN These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. Safety of operators has been taken into consideration at the design and manufacture phase, but inappropriate operation may cause electric shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of th product. Read the following safety instruction before starting the operation. [. . . ] Switch on/off automatically at the time you presetting. 1 2 3 Press the MENU button and then use Press the Press the button and then use button and then use / / / button to select the Settings menu. button to select the Timers. button to select Timer. 4 Press the button to enter the Timer Setting menu. 5 Press / button to select the desired day. 6 Press the OK button to confirm, if to cancel the select, Press the OK button. 7 Press / button to select the Start Time or Stop Time, and press OK button to enter the setting submenu. 8 Press 9 Press / / button to button move cursor. button or the digits button to setting the desired time. 10 When you are satisfied with your choice, press MENU button to return to the previous menu or press the EXIT button to return to TV viewing. Note 1. Please aware of the Stop Time must follow with Start Time. The two settings must be setting cooperatively. 2 . Please kindly be aware of the Timer Setting will take effective only after you finish setting and shut off the TV. Then the system will start to final countdown. Otherwise, the function will be ineffective. Sleep Timer Setting The sleep timer automatically shuts off the TV after a preset time (from 30 to 120 minutes). 1 2 3 Press the MENU button and then use Press the Press the button and then use button and then use / / / button to select the Time menu. button to select the SleepTimer. button to select the number of minutes. Select OFF, 30Min, 60Min, 90Min, 120Min. When the number of minutes you want is displayed on the screen, press the OK button. The time begins to count down from the number of minutes selected. 4 When you are satisfied with your choice, press MENU button to return to the previous menu or press the EXIT button to return to TV viewing. 5 To cancel the set sleep timer: Press the / button to select OFF. You can use the SLEEP button also to select quickly the sleep timer. Owner s Manual 23 Operation Settings Menu Date & Time setting 1 2 3 Press the MENU button and then use Press the Press the button and then use / / button to select the Settings menu. button to select Date & Time. button to enter the date & time setting menu. 4 Press the / / / button to select the desired option. 5 Press the OK button to confirm or enter the submenu. 4 When you are satisfied with your choice, press / MENU button to return to the previous menu or press the EXIT button to return to TV viewing. Today`s Date and Current time setting 1 2 3 2 Press the / button to select the Today`s Date & Current Time. Press the / button to select desired item and then use / button or the digits buttons to adjust the setting. Press the OK button to confirm. 4 When you are satisfied with your choice, press / MENU button to return to the previous menu or press the EXIT button to return to TV viewing. Time zone setting This function allows you to select your local time zone. Broadcasted time information will correct the clock display for your local time. 1 2 3 Press the / button to select the Time Zone. Press the OK button to confirm. Press the button and then use / button to adjust the setting. 4 When you are satisfied with your choice, press /MENU button to return to the previous menu or press the EXIT button to return to TV viewing. [. . . ] Verify if the antenna is in good condition. Check for local interference such as an electrical appliance or power tool. Disconnect the television from power supply and, 10 seconds later, connect the television to the power supply. If the problem still exists, contact authorized after-sales service for technical assistance. Blank screen No sound Poor sound No picture in some channel No color for some channel program (black and white) Spots with some or all pictures Horizontal/vertical bars or picture shaking Television out of control Note: Do not leave the television with static picture in an extended period as it may result in residual image on your television screen. Note: Production of the plasma screen requires high and precision technologies. [. . . ]