User manual HAIER HLT23E 07-04

[. . . ] Top Load Clothes Washer Lave-Linge Automatique á Dessus Frontal Pour des Vêtements Lavadora Automática Para las Ropas de Cargado Tapa User Manual Model # HLT23E Guide de l'Utilisateur Modéle # HLT23E Manual del Usuario Para Modelo de # HLT23E Quality Innovation Style English IMPORTANT SAFETY INSTRUCTIONS Warning ­ To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following: 1. Read all instructions before using the appliance. Use this appliance only for its intended purpose as described in this use and care guide. Use only detergents or softeners recommended for use in a clothes washer and keep them out of the reach of children. [. . . ] During the spin cycle, due to automatic centrifugal force of the machine it removes the lint by pulling it off the bottom of the filter and washing it down the drain. Note: It does not require any maintenance or special cleaning. Safety Lid Switch · If for any reason you open the lid in the middle of the wash cycle, the washer will not spin and will shut off automatically. Once the lid is closed, the washer will start back on. 9 English Care and Cleaning Guide Warning: Always unplug your washer to avoid electric shock before cleaning. Ignoring this warning may result in death or injury. · Check if the washer is overloaded: load may need to be re-balanced and clothes may need to be redistributed. · Check if the control knob is set properly. You may have to adjust the control knob. · The washer pauses in some cycles. This is normal in delicate or hand-washable cycle, which has short soak period where your clothes are being soaked for very short period of time. You will not hear washer operation for a short period of time. When the soak time is over, it will start automatically. Problems with water: · Not enough water coming out: Water faucet may need to be turned on fully. Water hoses may be tangled up or wrinkled up. Check water level selection, it may need to be readjusted. · Water Temperature is incorrect: Check your water heater temperature. Hot water needs to be at a temperature at least 120°F. Check to make sure the inlet hoses are properly connected. hot to hot & cold to cold) · Water leaks: This is due to not properly installing drain hose or fill hoses. Your home drain may be clogged or having constant water pressure. You may need to tighten hoses, check the plumbing or call a plumber. · Water pumped out before the cycle is completed: It happens if you open the lid in the middle of cycle. · Water will not drain: This is due to not installing your drain hose properly. You may need to connect the drain hose properly. [. . . ] Before calling please have available the following information: Model number and serial number of your appliance (found on the rear of the unit on the upper left hand side). The name and address of the dealer you purchased the unit from and the date of purchase. This warranty covers appliances within the continental United States, Puerto Rico and Canada. What is not covered by this warranty: Replacement or repair of household fuses, circuit breakers, wiring or plumbing. [. . . ]