User manual HAIER HPU-24H03/E1

[. . . ] PACKAGED UNIT OPERATION MANUAL HPU-18C03/E1 HPU-24C03/E1 HPU-18H03/E1 HPU-24H03/E1 Please read this operation manual before using the air conditioner. 0010519818 Cautions Disposal of the old air conditioner Before disposing an old air conditioner that goes out of use, please make sure it's inoperative and safe. Unplug the air conditioner in order to avoid the risk of child entrapment. It must be noticed that air conditioner system contains refrigerants, which require specialized waste disposal. The valuable materials contained in an air conditioner can be recycled. [. . . ] In DRY mode: (1)When room temperature becomes 2°C higher than temp. setting, unit will run at setting at Temp. . speed regardless of FAN setting; (2)When room temperature becomes between temp. setting and temp. setting+2°C, unit will run at setting at LO; (3) When room temperature becomes lower than temp. setting, unit will run spasmodically with 10 minutes ON and 6 minutes OFF . Units top Press ON/OFF button, the unit stops. 11 Operation HEAT Operation 1. Unit start Press ON/OFF on the remote controller, unit starts. Remote controller 2. Select operation mode Press MODE button. For each press, operation mode changes as follows: AUTO COOL DRY HEAT FAN Remote controller: AUTO COOL DRY HEAT FAN Then Select HEAT operation 3. Select temp. setting Press TEMP. button Every time the button is pressed, temp. setting increase 1oC, if kept depressed, it will increas rapidly Every time the button is pressed, temp. setting decrease 1oC, if kept depressed, it will decreas rapidly Select a desired temperature. Additional electricalheating devices used for heating Press the E. Heat button, the remote controller and the operation panel will display " " " "separately, and the electrical heating devices will st art to run. Press the "wi ll disappear and the E. Heat button again, the " " " devices will stop. About the operation condition for electrical heating devices. E. HEAT 5. Unit stop Press ON/OFF button, the unit stops. Operation condition for electrical heating (Cooling only model does not include) After the E. Heat function has been allowed, the microcomputer in airconditioner will meterage the indoor temperature. If the indoor temperature is less than or o o equal to 22 C , and 2 Cless than the defined temperature, the E. Heat devices will start to run, otherwise, the devices will stop running automaticly. 12 The liquid crystal will display the working state of last time (Expcept Timer and Sleep). changes as follows: AUTO COOL DRY HEAT FAN Remote controller: AUTO COOL DRY HEAT FAN 2 E. HEAT Auto fan speed 13 SLEEP Operation Before going to bed, you can simply press the SLEEP button and unit will operate in SLEEP mode and bring you a soundless sleep . Use of SLEEP function After the unit starts, set the operation status, then press SLEEP button before which the clock must be adjusted and time being set. In COOL, DRY mode 1 hours after SLEEP mode starts, temp. The unit will run for further 6 hours then stops. setting so that room temperature won't be too Iow for your sleep. SLEEP operation starts SLEEP operation stops Approx. 6hrs Rises 1OC 1 hr 1 hr Rises 1OC Temp. setting Unit stop In COOL, DRY mode Remote Controller 2. In HEAT mode 1 hours after SLEEP mode starts, temp will become 2 OC lower than temp. After another 1 hours, temp decrease by 2 OC further. The unit will run for further 3 hours then stops. setting so that room temperature won't be too high for your sleep. Temp. setting 1 hr Decreases 2OC 1 hr Decreases 2OC 3 hrs 3 hrs SLEEP operation starts Rises 1OC Unit stop SLEEP operation stops In HEAT mode 3. In AUTO mode The unit operates in corresponding sleep mode adapted to the automatically selected operation mode. E. HEAT 4. [. . . ] Brand new outdoor unit is charged 50g or 80g(24k) more refrigerant than regulated weight. Only for first installation, this extra 50g or 80g(24k) can be used to purge airin pipes. During this procedure, 50g or 80g(24k) refrigerant will be discharged in piping. (This must be strictly controlled within 90o and 10 sec. ) 25 Installation Manual of Room Air Conditioner Note: When additional refrigerant is necessary, first purge air out of connecting pipe by external gas, then drive out the excessive rerigerant by purging method. Brand new unit is charged 80g more refrigerant than spec. [. . . ]