User manual HAIER HW-05LN03

[. . . ] TEMPERATURE 5 4 3 2 1 MIN COOL 6 7 8 9 10 MAX COOL FAN ONLY HI LOW SPEED ON OFF POWER Wait 3 Minutes Before Restarting HW-05LM13 HW-05LN03 001051 1 2 3 3 4 4 5 6-7 6 6-7 8-12 9 9-10 11-12 13-14 15 Installing unit into a window Wall installations 5 2-way airflow TEMPERATURE 5 4 3 2 1 MIN COOL 6 7 8 9 10 MAX COOL FAN ONLY HI LOW SPEED ON OFF POWER Wait 3 Minutes Before Restarting easy access filters control panel MODEL: HW-05LM13 HW-05LN01 5. [. . . ] Install a second wood strip (approximately 150mm long by 38mm wide and same thickness as first strip) in the center of the outer sill flush against the back off the inner sill. If the distance between STORM WINDOW FRAME and WOOD STRIP MOUNTED ON TOP OF INNER SILL is more than 25mm, two of wood strip are not necessary. I N D O O R S INNER SILL O U T D O O OUTER R SILL S WOOD STRIP MOUNTED ON TOP OF INNER SILL 25mm MAX. 19mm CLEARANCE STORM WINDOW FRAME O U T OUTER D SILL O O R S INNER SILL Hereinbefore is just for the demonstration, please adjust the data according to the actual structure and dimension of the window. WOOD STRIP I FOR BASEPAN N ANGLE D O O R S 2 3 10 11 Also the side louvers should not be blocked. This is to have proper air circulation in and around the compressor. (See fig. #2) 12 E TEMPERATUR 5 4 3 2 1 MIN COOL 6 7 8 9 10 MAX COOL FAN ONLY LOW PEED OFF POWER Always unplug your air conditioner before cleaning. The air filter behind the front grille should be checked and cleaned at least once every 2 weeks or more often if necessary. Open the inlet grille downward by pulling out the top of the inlet grille. [. . . ] To clean the front panels or the cabinet DO NOT use harsh chemicals, abrasives, ammonia, chlorine, bleach, concentrated detergents, solvents or metal scouring pads. Always use a soft cloth dampened with water or mild soap and water solution to wipe the front of the cabinet. 13 14 (see page 6) 15 [. . . ]