User manual HAIER HWF06XC5 MANUAL 2

[. . . ] Fasten the curtains to the unit with 8 short screws 13/32". 11 2 1. This unit is designed for installation in standard double hung windows with actual opening widths of 22 to 36 . [. . . ] This unit is designed for installation in standard double hung windows with actual opening widths of 22 to 36 . The upper and lower sash must open sufficiently to allow a clear vertical opening of 14 from the bottom of the sash to the window stool. If storm window presents interference, fasten a 2 wide wood strip(not included) (OUTER SILL) to the inner window sill across the full width of the sill. The wood strip should be thick enough to raise the height of the window sill so that the unit can be installed without interference by the storm window frame (STORM WINDOW FRAME) or wood strip (OUTDOORS) to help condensation to drain properly to the outside. Install a second wood strip (approximately 6 long by 3/2 wide and same thickness as first strip) in the center of the outer sill flush against the back off the inner sill. Cut the seal gasket to the window width. Stuff the sash seal between the glass and the window to prevent air and insects from getting into the room. Fasten the basepan angle, using a short screw13/32". BASEPAN ANGLE WINDOW SEAL GASKET SHORT SCREW13/32" WOOD SCREW31/32" TABS AIR FILTER (INSIDE) Always unplug your air conditioner before cleaning. Air filter needs to be cleaned at least once a mouth for your unit to operate at optimum efficiency. The filter can be slid out by drawing the left and right tabs located on the air filter. DO NOT use your air conditioner without the air filter in place. [. . . ] Fasten the basepan angle, using a short screw13/32". BASEPAN ANGLE WINDOW SEAL GASKET SHORT SCREW13/32" WOOD SCREW31/32" TABS AIR FILTER (INSIDE) Always unplug your air conditioner before cleaning. Air filter needs to be cleaned at least once a mouth for your unit to operate at optimum efficiency. [. . . ]