User manual HAIER HWO60SM6C1BH

[. . . ] 5 Important safety indications 13 Product description 15 How the product works 16 Use of the appliance 17 Cleaning & maintenance 18 FAQs - Recommendations 18 Environmental protection and disposal 00 Installation Thank you for choosing one of our products. For the best results, please read this manual carefully and retain it for future reference. Before installing the oven, take note of the serial number, which you may need if any repairs are required. Check that the oven has not been damaged during transportation. [. . . ] CAUTION: Do not refill the cavity bottom with water during cooking or when the oven is hot. When inserting the grid tray pay attention that the anti-slide edge is positioned rearwards and upwards · For a correct use of the oven it is advisable not to put the food in direct contact with the racks and trays, but to use oven papers and/ or special containers. The dripping tray collects the residues that drip during cooking. wARNINGS · Any excess of spilled material should be removed before cleaning. WARNING: before cleaning the oven: Remove large or coarse food residues from the inside of the Do not place tea towels. Remove the temperature probe from inside the oven. Use only the recommended temperature probe in this oven. STAND-BY The oven goes in standby after 19 minutes of inactivity. To exit from this condition the ON/OFF button has to be put in OFF and be pressed again. The oven is waiting for a programmed cooking. preci Probe WARNINGS (wireless temperature probe) · This product is exclusive for oven appliances. It should only be used as described in this User Manual. Always wear oven gloves to remove Preci Probe from the food after cooking. It is required to FULLY INSERT Preci Probe metal bar properly into the food until the BLACK ceramic EDGE of it during cooking. Insert Preci probe in the food up to here If the Preciprobe temperature exceeds 100°C, cooking will stop and the Preciprobe must be removed from the oven as soon as possible, wearing gloves, to avoid damage to the probe. pRECIPROBE · Before the use verify the charge of the Preci Probe: 1. Put Preci Probe into the charger and close the cover. Connect the charger to a USB power source, such as USB adapter or USB socket of PC/notebook with the USB cable. The charger may not be working properly with power bank because of its auto switch-off function. LED of the charger will turn on and is flashing during charging. It will turn off when Preci Probe is fully charged. Do not expose the metal part of Preci Probe to the heat generated by oven directly. [. . . ] In addition to the accessories supplied with the oven, we advise you only use dishes and baking moulds resistant to very high temperatures. cHANGING LAMP: · Disconnect the oven from the mains supply. Undo the glass cover, unscrew the bulb and replace it with a new bulb of the same type. Once the defective bulb is replaced, replace the glass cover. [. . . ]