User manual HAIER L17L6A-G1

[. . . ] Attention should be paid to avoid accidental scratches or impacts onto the LCD screen. The function of sound may be lost and the function of picture may bedisordered in electrostatic discharge, they can be restored by operation of the controls. Caution Unauthorized disassembly of this product is prohibited. Power supply This product requires DC power supply which is switched by a AC-DC converter. The voltage value is as per the information specified on the rating label, which is fixed on the back of the television set. The product will never be supplied with AC power source. The information of AC-DC voltage is stated on the converter casing. English-2 WARNING Power source connection 1 Plug the 12V AC-DC converter to the 12V input jack of the television set. [. . . ] 3 Do not operate the remote controller directly in floodlight or strong sunlight. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. English-6 FUNCTIONS OF REMOTE CONTROLLER DC standby DISPLAY To display the SLEEP TIME, press the VOL+/- buttons to set the sleep time A2 stereo/NICAM selection Digital bass selection Autoadjust the display to match the TV screen in PC mode) DIGITAL BASS POWER MUTE Press to conceal the sound of programme DISPLAY 1 2 3 SLEEP 4 5 6 NICAM 7 8 9 AD 0 TV/AV Channel direct selection To exchange between TV and other available video inputs Option of computer input Programme quick review To select programme or menu item To make sure the selection Adjusts volume, reset menu or enter submenu To call the main menu Option of picture mode OK CH+ Q. VIEW PC MENU VOL+ DVD P. MODE CH- S. MODE ARC Option of DVD input Option of sound mode The ARC function is not available except L17LV6-A1 and L17L6A-G1 (Press this key, the present size will be on the screen. Then use VOL +/- to adjust the picture size between Fill all and 4:3) English-7 OPERATION INSTRUCTIONS Turning the TV On and Off Standby Setup: The AC-DC converter and the AC power cord must be set up and connected to have the TV in standby mode ready to be turned on. Press the power button on the front panel of the TV to go into standby mode. POWER 1 If the TV is in standby mode, press the Power button on the remote controller to turn on the TV Set. 2 Press the Power button and the TV goes into standby mode. Note : If the TV is on and the power button on the remote controller is pressed to turn the TV off, the TV goes into standby mode. Programme selection 1 You can select a channel with the CH-/+ or the NUMBER button. CH+ 1 2 CH3 4 5 6 7 8 9 Volume adjustment 0 1 Press the VOL-/+ buttons to adjust the volume. VOL+ VOL- Quick view 1 Press the Q. VIEW button to view the last programme you were watching. Q. VIEW English-8 OPERATION INSTRUCTIONS Mute function MUTE 1 Press the MUTE button then the sound will be switched off and the display appears. 2 You can cancel it by pressing the MUTE again. On screen language selection OSD TONE LANGUAGE SOUND SYSTEM COLOR SYSTEM SLEEP TIME OFF English DK Auto 0 min/0 min The menu can be displayed on the screen in desired language. 3 Press CH- button to enter the Menu then press CH-/+ buttons to select LANGUAGE. 4 Press the VOL+ button to select desired language. English-9 SCREEN DISPLAY How to select the item you want to adjust. 1 Press the MENU button and the main menu will appear on the screen. PICTURE MENU BRIGHTNESS CONTRAST SHARPNESS COLOR 65 65 65 65 2 Press VOL+/- buttons to select PICTURE, SOUND, OPTIONS or TUNER Menu. 3 Press CH- button to enter the Menu then press CH-/+ buttons to select the item. 4 Press VOL+/- buttons to adjust Menu items or enter a submenu. 5 Press MENU or OK button to exit. SOUND MENU DIGITAL BASS AVC BALANCE EQUAUZER OFF OFF 65 OPTIONS MENU OSD TONE LANGUAGE SOUND SYSTEM COLOR SYSTEM SLEEP TIME OFF English DK Auto 0 min/0 min TUNER MENU ATM MANUAL STORE FINE TUNE ADD/ERASE CURRENT CHANNEL OFF 2 English-10 PROGRAMME SETUP Setting up TV programme CH+ 1 2 CH3 4 5 6 7 8 9 Up to 200 TV programmes can be stored in this set. Once you have preset the programmes, you will be able to use the CH-/+ or NUMBER button to select the programmes . Programmes can be tuned using automatic or manual modes. 0 Auto programme(ATM) All programmes that can be received are stored by this method. It is recommended that you use auto programme during installation of this set. 1 Press the MENU button. ATM MANUAL STORE FINE TUNE ADD/ERASE CURRENT CHANNEL 2 Press VOL+ button to select the fourth menu. OFF 2 3 Press CH- button to enter the menu then press CH -/+ buttons to select the ATM . 4 Press VOL+ button to start the search. English-11 PROGRAMME SETUP Manual programme Manual programme lets you manually tune and arrange the programmes in whatever order you desire. 1 Press the MENU button. 2 Press VOL+ button to select the fourth menu. 3 Press PRO- button to enter the menu then press CH -/+ buttons to select the MANUAL STORE. 4 Press VOL+ button to start the search. Channel fine tuning Channel fine tuning is not suggested unless it is necessary when abnormal status occurs to achieve a better picture or sound quality. 1 Press the MENU button. 2 Press VOL+ button to select the fourth menu. 3 Press CH- button to enter the menu then press CH -/+ buttons to select the FINE TUNE. [. . . ] 2 The sound mode STANDARD, MUSIC, MOVIE and SPEECH are for the good sound reproduction at the factory and cannot be changed. S English-16 OTHERS Option Control 1 Press the MENU button. 2 Press VOL+ button to select the third menu. Unauthorized repair and disassembly are prohibited to avoid electric or fire hazards. English-20 TROUBLESHOOTING Verify and try to solve the problems by yourself according to the instructions specified in the table below before contacting the after-sales service for technical assistance. Do not set the television with a still picture for an extended period as this might result in image residue on the screen. [. . . ]