User manual HAIER L1910A-C

[. . . ] Remote Control Key Functions Installing Batteries 1. Slide open the cover of the battery compartment on the back of the remote control. 2. Load two AA alkaline batteries in the compartment. (plus and minus poles to respective mark) 3. Replace the cover of the battery compartment. 1 2 3 Precautions Make sure that there is no obstacle between the remote controller and television set. As strong light may interfere the signals, change your position to operate the remote controller if the television cannot be turned on or off as you expect. Keep the remote controller away from heat source or humid area to ensure effective performance of the remote controller. Make sure that two AA 1. 5V alkaline batteries are loaded. [. . . ] The following menu will display on the screen: MANUAL SEARCH DOWN UP Press V+/- to select UP or DOWN, and then press MENU to confirm. (If you select DOWN, the search will search the lower frequency channel and UP will search the higher frequency channel) 2. COUNTRY: Press V+/- to select the country . AUTO SEARCH : Auto search and save the channel . Press the V+ button to start to search the channel and the following menu will appears on the screen: AUTO SEARCH NO YES Press V+/- to select YES or NO, and menu to confirm. You could press MENU to stop the search. NOTE: If you want to search the channels in L or L' system, you need to set the sound system to L in OSD TELETEXT Teletext is an information system, broadcast by certain channels, which can be read like a newspaper . It also provides subtitles for people with hearing difficulties or those who are unfamiliar with the language in which a particular program is being broadcast (cable networks, satellite channels, etc. ). Note: The teletext buttons could be working even if there is no teletext signal, but there is no teletext display. Teletext Teletext functions To select Teletext press the Teletext button on the handset. To switch off Teletext, press the button again. Note all menu functions are not available in Teletext mode . Only a few direct button control functions are available in TELETEXT mode, they are: Volume adjustment Mute function V+ P+ VMENU Page up/down Use the P+/- buttons to browse next or previous page. P- 1 5 9 2 6 0 3 7 4 8 Page number entering To select a Teletext page, enter the page number using the numeric key pad on the remote control, or use the P+ or P- buttons, or the coloured Fast text buttons. TUNE Mix mode To view the TV picture while in Text mode press the button, this will superimpose the Teletext data on top of the Tv picture. Press this button again to return to Full text. INDEX Press the tune button to go to the index page of teletext. TELETEXT Teletext Cancel mode This feature allows the TV picture to be displayed while next page to be searched is entered and found. Only the top teletext line is displayed until the page is found. Press the button to hide the teletext information. Either press the button or the Text button to exit the cancel display mode. Language change Pressing the button will change the Teletext characters between Eastern and Western. Hold Pressing the button will stop the teletext page automatically updating. This feature is very useful where there are several teletext pages or data on the same page number. Size Pressing the button changes between full screen top half bottom half full screen. This feature is very useful as it magnifies the image making the characters easier to read. Reveal Pressing the button will reveal hidden text. This feature is used to reveal information such as answers to Teletext on-line interactive puzzles. Subcode / Time By entering its 4-digit number to enter a secondary page;While in normal TV mode only, pressing the button will display the teletext time in the top right hand corner for a few seconds. Switch teletext on/off Press the button on the remote control to turn teletext On/Off. Fast text coloured buttons Fast text automatically displays the four most commonly used pages that the broadcaster thinks that you may want to choose next. [. . . ] Note: . . Preference Page. . TV Type Parental Password Default Auto PAL AUTO NTSC . . Preference Page. . PLAY/ENTER TV Type Parental Password Default Auto 2G 3 Pg 4 Pg 13 5 Pgr 6R 7 Nc17 8 Adult Off 1 To change this setting you must enter your password. (Initial password is 1234) 2 When set to OFF, all discs may be viewed. Password change: You can change your password by entering 4 digits. Your must confirm the 4 digits before the new password can be accepted. . . Preference Page. . TV Type Parental Password Default Auto Change Old Password New Password Confirm Pwd NOTE:If you forget your password or a password is accidentally set enter 1369 as the password. This will enable you to regain control. DVD System Setup(Continued) DVD System Setup Default: Resets all settings SETUP (except password and parental lock status) for this DVD player back to the manufacturers original settings. [. . . ]