User manual HAIER MT2025D

[. . . ] OWNER'S MANUAL 20" INCH ANALOG/DIGITAL TELEVISION MTD2025D MUTE Q. VIEW INPUT INFO TV/DTV 1 4 7 SAP 2 5 8 0 3 6 9 P. MODE - OK CH+ VOL - MENU VOL + CH- CC SLEEP S. MODE GUIDE ARC CH. LIST EXIT Before operating the unit, please read this manual thoroughly. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. NOTE: WARNING: Please keep all packaging material for at least 90 days in case you need to return this product to your place of purchase. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] With the switch in the "A" position, tune your unit to the output of the converter/descrambler box (usually channel 3 or 4) and use the converter/descrambler box to tune scrambled channels. Incoming 75 ohm cable TV cable Splitter Converter/ descrambler A/B switch A 75 ohm cable to unit B RF IN jack 9 Connections to other equipment (continued) Using the audio/video inputs If you connect the TV to a camcorder or Video Game, you can select different modes by pressing INPUT. Press INPUT repeatedly to select the desired mode. "AV1", "AV2" , "COMPONENT" , "DVD"or TV channel will display on the screen for 4 seconds. AV1 AV2 COMPONENT DVD TV Channel AV 1 To connect the TV to a camcorder To playback from the camcorder, connect the camcorder to the unit as shown. Camcorder VIDEO IN Rear of TV To Audio/Video OUT AUDIO IN (R) AUDIO IN (L) Audio/Video cord (not supplied) To connect the TV to a Video Game The TV can also be used as a display device for many video games. However, due to the wide variety of formats, they have not all been included in the suggested connection diagram. Y need to consult oul each component's Owner's Manual for additional information. Rear of TV VIDEO IN Video Game To Audio/Video OUT AUDIO IN (R) AUDIO IN (L) Audio/Video cord (not supplied) 10 Setting the language and blue screen You can choose from three different languages (English, French and Spanish) for the on-screen displays. SETTING THE LANGUAGE 1 Press POWER ( MUTE Q. VIEW INPUT INFO TV/DTV ) to turn on the TV. 2 Press MENU, and then 1 4 7 SAP 0101 2 5 8 0 3 6 9 P. MODE - press VOL+/- button to select FUNCTION menu, then press CH- button to enter. FUNCTION LANGUAGE BLUE SCREEN NTSC CAPTION PARENTAL LOCK ENGLISH ON C1 OK CH+ VOL - MENU VOL + 3 Press CH+/- button to select the LANGUAGE option, then press VOL+/- to select the desired language: English, Spanish or French. CH- CC SLEEP S. MODE GUIDE ARC CH. LIST EXIT 4 Press MENU until the MENU screen disappears. SETTING THE BLUE SCREEN 1 Press MENU, and then press VOL+/- button to select FUNCTION menu, then press CH- button to enter. FUNCTION LANGUAGE BLUE SCREEN NTSC CAPTION PARENTAL LOCK ENGLISH ON C1 0101 2 Press CH+/- button to select the BLUE SCREEN option, then press VOL+/- to select OFF or ON. 3 Press MENU until the MENU screen disappears. 11 Channel menu Here describes the case for searching and memorizing channels for DTV/ATV. MUTE Q. VIEW INPUT INFO TV/DTV 1 4 7 SAP 2 5 8 0 3 6 9 P. MODE - FULL/AUTO SCAN (DTV/ATV) (When using antenna) The channels broadcasted in DTV and ATV are automatically scanned and memorized. Only the receivable channels in the area where this TV is used will be memorized. FULL/AUTO SCAN (CATV) (When using basic cable) The channels broadcasted in CATV are automatically scanned and memorized. NOTE: Be sure that antenna or cable is connected properly before plugging the power cord. OK CH+ VOL - MENU VOL + CH- 1 Press MENU, and then press VOL+/- button to select CC SLEEP S. MODE CHANNEL menu, then press CH- button to enter. GUIDE ARC CH. LIST EXIT 2 Press CH+/- button to select the RECEPTION option. 0101 3 Press VOL +/- button to select AIR/ CABLE. CHANNEL SKIP RECEPTION AUTO SCAN COLOR SYSTEM OFF ATV AIR AUTO 4 Press CH +/- button to select AUTO SCAN option. Only in analog signal 5 Press VOL+ button to start scanning. When you press VOL+ on the remote control, scanning the channels in both analog and digital modes will automatically start. When scanning is completed, the memorized smallest channel will be displayed. When you press MENU button while scanning, the scanning is interrupted and the memorized smallest channel is displayed. 12 Channel menu SETTING SKIP After the programs are presetting, you can skip some programs so that to select your favorite channels only. 1 Press MENU, and then MUTE Q. VIEW INPUT INFO TV/DTV press VOL+/- button to select CHANNEL menu, then press CH- button to enter. 0101 CHANNEL SKIP RECEPTION AUTO SCAN COLOR SYSTEM OFF ATV AIR AUTO 1 4 7 SAP 2 5 8 0 3 6 9 P. MODE - 2 Press CH+/- button to select the SKIP option, then press VOL+/- button to select ON or OFF. OK CH+ NOTE: When tuning DTV channels and no signal is present, VOL MENU VOL + the SKIP-over option will be available. CH- CC SLEEP S. MODE If you want to recover the skipped channel 1. Use Direct-digit Choosing button to select the number of the channel to be recovered. Press VOL+/- button to set SKIP as Off. GUIDE ARC CH. LIST EXIT SETTING COLOR SYSTEM(only in ATV mode) 1 Press MENU, and then press VOL+/- button to select CHANNEL menu, then press CH- button to enter. 0101 CHANNEL SKIP RECEPTION AUTO SCAN COLOR SYSTEM OFF ATV AIR AUTO 2 Press CH+/- button to select the COLOR SYSTEM option, then press VOL+/- button to select AUTO or NTSC. 13 Channel selection You can select the channel by using either CH +/- button or Channel number buttons. How to select the channel in each way is shown below. MUTE Q. VIEW INPUT INFO TV/DTV 1 Using CH +/- button 3 6 9 P. MODE 1 4 7 SAP 2 5 8 0 Using CH +/- button on the remote control, change the channel. Same operation is available with CH +/- button on the front panel of the main unit. 2 Press the Direct Channel selection buttons to select the channel. Antenna Mode Direct Channel Selection When the Antenna/Cable menu option is in the Antenna position, all channels can be instantly selected by using digits button. Example, to select channel 2, press "2". If you select the channel more than 69, the channel will not be change, it is no available. 2-9: OK - CH+ VOL - MENU VOL + CH- CABLE Mode Direct Channel Selection CC SLEEP S. MODE GUIDE ARC CH. LIST EXIT When the Antenna/Cable menu option is in the Cable position, channels can be selected as follows: 1-9: Press 1-9 as needed. Example, to select channel 2, press "2". Example, to select channel 32, press "3" then "2". 100-125: Press the digital 1 button, the "1--" will appear on the screen, then press the 2 digits of remain in order. TV VHF 2-13 UHF 14-69 CABLE VHF 2-13 STD/HRC/IRC 14-36 (A) (W) 37-59 (AA) (WW) 60-85 (AAA) (ZZZ) 86-94 (86) (94) 95-99 (A-5) (A-1) 100-125 (100) (125) 01 (5A) NOTE: In the DTV broadcasting, one channel sometimes broadcasts multiple programs depending on the air time. In this case, the main channel is called major channel and the sub channel is called minor channel. 14 Volume adjustment This section describes how to adjust the volume when viewing TV. The MUTE function, which is useful when you have a visitor or a phone call, will be also described. MUTE Q. VIEW INPUT INFO TV/DTV 1 Using VOL +/- button 2 5 8 0 3 6 9 P. MODE - 1 4 7 SAP OK You can adjust the audio volume with VOL +/- button on the remote control. The volume bar is displayed at the bottom of the screen when adjusting the volume. [. . . ] 2 Press VOL+/- button to select DTV SETUP option, then press CH- button to enter. 0101 DTV SETUP DTVCC DAYLIGHT SAVING OFF TIME ZONE ALASKA ATSC PARENTAL LOCK 3 Press CH+/- button to select TIME ZONE option. 4 Press VOL+/- button to select your viewing area time zone: NEWFOUNDLAND, ATLANTIC, EASTERN, CENTRAL, MOUNTAIN, PACIFIC, ALASKA, HAWAII, or SAMOA 29 DTV setup menu SETTING ATSC PARENTAL LOCK 1 Press MENU. The main menu screen will appear. MUTE Q. VIEW INPUT INFO TV/DTV 2 Press CH+/- button to 3 6 9 P. MODE 0101 1 4 7 SAP 2 5 8 0 select DTV SETUP. then press VOL- button to enter the submenu. DTV SETUP DTVCC DAYLIGHT SAVING OFF TIME ZONE ALASKA ATSC PARENTAL LOCK 3 Press CH+/- button to select ATSC PARENTAL LOCK. OK - CH+ VOL - MENU VOL + 4 Enter the password (4 digits) using the number buttons(0-9). The TV is set up with the initial password 0000 and enter next submenu. ENTER CODE #### CH- CC SLEEP S. MODE GUIDE ARC CH. LIST 0101 EXIT DTV SETUP VERSION DIMENSION CLEAR RRT [RRT 0] Version V-chip broadcast source version. [. . . ]