User manual HAIER WDLS056 INSTALLATION

[. . . ] Read all of the instructions before using this appliance. When using this appliance, always exercise basic safety precautions, including the following: 1. Use this appliance only for its intended purpose as described in this use and care guide. This water dispenser must be properly installed in accordance with the installation instructions before it is used. [. . . ] When power has been restored, re-plug the power cord into wall outlet. This water dispenser maintains instant hot and cold water for your cooking and drinking needs. Press the tap lever down to release the water flow. Note: The hot (red) water faucet is equipped with a child safety lock to prevent accidental spilling of hot water. To release the hot water flow, the tap lever must be squeezed and then pushed down. â· In the case of WDLT165 press in the hot water safety child lock and then push down. In case of WDLS056 push the red child safety button to the left and press in the button for hot water. For cold water just push the right button in. Cold Water Switch (green): The cold water switch activates the cooling process when turned ON. Note: When turning on the unit for the first time, it will take some time COLD to chill the water. Be careful when carrying hot water in your cup or container to avoid any injury or harm from spills. When the green and red lights are illuminated on the front of the unit, the heating and cooling process is in progress. When the cold and hot water has reached their proper temperatures, both lights will turn off automatically. USING THE REFRIGERATOR COMPARTMENT (Not in all models) The convenient refrigerator compartment can be very useful in storing beverages and other perishable food items. â· When the dispenser is turned on for the first time, avoid food spoilage by waiting at least 8 hours before putting any food or beverages into the compartment, as the compartment may not be cool enough to store foods. During the automatic defrost cycle, ice build-up on the rear interior wall of the compartment will melt and drip into the water-collecting tray and then evaporate naturally. Before using any cleaning product, always read and follow the manufacturer's instructions and warnings to avoid personal injury and/or product damage. Note: It is best to clean the dispenser and its surrounding area in between replacing the empty bottle with a new one. This way you can move the unit easily without the weight of the bottle. Always unplug the unit before cleaning to avoid electric shock. Failure to do so may result in death or injury. Before cleaning, place the dust cover on top of the water guard to prevent dust and debris from going into the dispenser while cleaning. [. . . ] You must remove the drip tray from the dispenser and empty out the water. What happens if the water dispenser is running dry (without the water)? â· You must never let the water dispenser run dry as this may cause damage to the unit and create a fire. You must replace the empty bottle immediately. [. . . ]