User manual HAIER WDNS115BW

[. . . ] When using this appliance, always exercise basic safety precautions, including the following: 1. Read all of the instructions before using this appliance. Use this appliance only for its intended purpose as described in this use and care guide. This water dispenser must be properly installed in accordance with the installation instructions before it is used. [. . . ] DO NOT plug in the water dispenser until you have checked that water flows out of both faucets when the hot and cold water release levers are pressed. Never turn on the water dispenser without water. Doing so may cause the unit to catch fire or malfunction. Check that water flows out by pressing both the hot and cold water faucets one at a time. Plug the power cord into an 115volt / 60 Hz outlet. To activate the water heater and cooler, press the hot water and cold water switches to the ON position, the switches should be lit. This water dispenser maintains instant hot and cold water for your cooking and drinking needs. Press the button down to release the water flow. Note: The hot (red) water button is equipped with a child safety lock to prevent accidental spilling of hot water. To release the hot water flow, the tap lever must be squeezed and then pushed down. Note: The hot water faucet is equipped with a child safety lock to prevent accidental spilling of hot water. To release the hot water flow, push the child safety lock button down and as you push in the hot water button. Caution: Be careful when carrying hot water in your cup or container to avoid any injury or harm from spills. Cold Water Switch (green): The cold water switch activates the cooling process when turned ON. Note: When turning on the unit for the first time, it will take some time to chill the water. Be careful when carrying hot water in your cup or container to avoid any injury or harm from spills. When the green and red lights are illuminated on the front of the unit, the heating and cooling process is in progress. When the cold and hot water has reached their proper temperatures, both lights will turn off automatcially. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. This appliance is equipped with a cord containing a grounding wire and a grounded plug. The plug must be inserted into an outlet that is properly installed and grounded. â· Improper use of the plug may result in the risk of electric shock. [. . . ] â· Remove the drain plug located on the side of the unit to release the water and empty both the tanks. note: Remove drain plug by turning it in a "clockwise direction". Please note not to use any tools to remove or install the drain plug. After completing the drain process, replace the drain plug to its original position. [. . . ]