Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual HANNA INSTRUMENTS HI 983311. We hope that this HANNA INSTRUMENTS HI 983311 user guide will be useful to you.
Lastmanuals help download the user guide HANNA INSTRUMENTS HI 983311.
Manual abstract: user guide HANNA INSTRUMENTS HI 983311
Detailed instructions for use are in the User's Guide.
[. . . ] SPECIFICATIONS Range Resolution Accuracy (@20°C) Typical EMC Deviation TDS Factor Calibration Battery Type Battery Life Auto-off Environment Dimensions Weight 0 to 3999 µS/cm / 0 to 2000 ppm 0. 0 to 60. 0°C 1 µS/cm / 1 ppm / 0. 1°C ±2% f. s. (EC/TDS) / ±0. 5°C ±2% f. s. (EC/TDS) ±1°C 0. 5 or 0. 7 (two options available upon request) factory calibrated 2 x 1. 5V AAA approx. [. . . ] Battery replacement must only take place in a non-hazardous area and using two 1. 5V AAA alkaline batteries.
·
OPERATIONAL GUIDE
· To switch the meter on, press the ON button. All the used segments on the LCD will be visible for a few seconds, followed by a percent indication of the remaining battery life (e. g. · Immerse the probe in the solution to be tested, while paying attention to the minimum immersion level marked on the meter shaft. · Select either EC or TDS mode with the SET/HOLD button. · The reading is stable when the hourglass symbol on the LCD disappears. · The EC (or TDS) value is shown on the primary LCD, while the secondary LCD displays the temperature of the sample. The ATC symbol on the LCD means that measurements are Automatically Temperature Compensated. · To freeze the display, press the SET/HOLD button until HOLD appears on the secondary LCD. Press either button to return to the normal mode. · The meter will automatically switch off after 8 minutes of non-use. Note: The CAL symbol on the LCD means that the meter has been calibrated. If necessary, contact your Dealer for recalibration. ·
·
Warranty
All Hanna Instruments meters are warranted for two years against defects in workmanship and materials when used for their intended purpose and maintained according to instructions. This warranty is limited to repair or replacement free of charge. [. . . ] Any variation introduced by the user to the supplied equipment may degrade the instrument EMC performance. To avoid electrical shocks, do not use this instrument when voltage at the measurement surface exceeds 24 Vac or 60 Vdc. To avoid damage or burns, do not perform any measurement in microwave ovens. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HANNA INSTRUMENTS HI 983311
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual HANNA INSTRUMENTS HI 983311 will begin.
