Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual HANNA INSTRUMENTS PRIMO 2. We hope that this HANNA INSTRUMENTS PRIMO 2 user guide will be useful to you.
Lastmanuals help download the user guide HANNA INSTRUMENTS PRIMO 2.
Manual abstract: user guide HANNA INSTRUMENTS PRIMO 2
Detailed instructions for use are in the User's Guide.
[. . . ] PRIMO 2
Microprocessor TDS and Temperature Meter
with Automatic Temperature Compensation
PRIMO 2
Microprocessor TDS and Temperature Meter
with Automatic Temperature Compensation
0 to 1999 ppm 0. 0 to 60. 0°C RESOLUTION 1 ppm 0. 1°C ACCURACY ±2% f. s. (@25°C/77°F) ±0. 5°C TYPICAL EMC ±1% f. s. [. . . ] The meter automatically compensates for temperature variations. · The TDS value of the sample will be shown on the LCD in ppm unit. · To display the temperature measurement of the sample, press the indicated button. The temperature will be shown on the LCD in °C unit. · Press the same button again to return to the ppm measurement mode. · To extend the batteries life, after 5 minutes of nonuse the meter provides for auto-off. CALIBRATION: · Switch the meter on. · Press and hold the ON/OFF button for about 3 seconds. "1382" will start blinking on the display to indicate that the calibration mode has been entered.
Warranty
Open the compartment and replace the two 1. 5V batteries while paying attention to their polarity. Batteries should be replaced only in a non hazardous area using the battery type specified in this instruction sheet. Note: Note: Once the batteries have been replaced, turn the meter OFF and then ON again. Wait for about 30 seconds to allow a complete self-test, and then perform a new calibration. ERROR CODES:
Error in calibration, wrong calibration solution or damaged probe. Low battery indication.
The Primo 2 meter is warranted for one year against defects in workmanship and materials when used for their intended purpose and maintained according to instructions. [. . . ] When shipping any instrument, make sure it is properly packaged for complete protection. To validate your warranty, fill out and return the enclosed warranty card within 14 days from the date of purchase. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HANNA INSTRUMENTS PRIMO 2
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual HANNA INSTRUMENTS PRIMO 2 will begin.
