Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual HANNA INSTRUMENTS PRIMO 5. We hope that this HANNA INSTRUMENTS PRIMO 5 user guide will be useful to you.
Lastmanuals help download the user guide HANNA INSTRUMENTS PRIMO 5.
Manual abstract: user guide HANNA INSTRUMENTS PRIMO 5
Detailed instructions for use are in the User's Guide.
[. . . ] PRIMO 5
Microprocessor Conductivity Meter
with Automatic Temperature Compensation
PRIMO 5
Microprocessor Conductivity Meter
with Automatic Temperature Compensation
SPECIFICATIONS: RANGE 0 to 1999 µS/cm RESOLUTION 1 µS/cm ACCURACY (@25°C/77°F) ±2% f. s. TEMPERATURE Automatic from COMPENSATION 0 to 60°C (32 to 140°F) with ß=2%/°C ENVIRONMENT 0 to 50°C (32 to 122°F); 95% RH BATTERY TYPE 2x1. 5V alkaline (included) BATTERY LIFE approx. [. . . ] The meter automatically compensates for temperature variations. · The conductivity value of the sample will be shown on the LCD in µS/cm unit. · To extend the batteries life, after 5 minutes of nonuse the meter provides for auto-off. CALIBRATION: · Switch the meter on. · Press and hold the ON/OFF button for about 3 seconds. "1413" will start blinking on the display to indicate that the calibration mode has been entered. · Immerse the probe in the HI 70031 calibration solution without exceeding the maximum immersion level. · Stir gently and wait for about 20 seconds to confirm the reading. · Once the display stops blinking, the meter is calibrated and ready for use.
Error in calibration, wrong calibration solution or damaged probe. Low battery indication.
Warranty
The Primo 5 meter is warranted for one year against defects in workmanship and materials when used for their intended purpose and maintained according to instructions. This warranty is limited to repair or replacement free of charge. Damages due to accident, misuse, tampering or lack of prescribed maintenance are not covered. If service is required, contact the dealer from whom you purchased the instrument. If under warranty, report the model number, date of purchase, serial number and the nature of the failure. [. . . ] To avoid electrical shocks, do not use this instrument when voltage at the measurement surface exceeds 24 VAC or 60 VDC. To avoid damage or burns, do not perform any measurement in microwave ovens. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HANNA INSTRUMENTS PRIMO 5
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual HANNA INSTRUMENTS PRIMO 5 will begin.
