User manual HANNA INSTRUMENTS TDS 1

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual HANNA INSTRUMENTS TDS 1. We hope that this HANNA INSTRUMENTS TDS 1 user guide will be useful to you.

Lastmanuals help download the user guide HANNA INSTRUMENTS TDS 1.


Mode d'emploi HANNA INSTRUMENTS TDS 1
Download
Manual abstract: user guide HANNA INSTRUMENTS TDS 1

Detailed instructions for use are in the User's Guide.

[. . . ] TDS1 TDS Meter with Automatic Temperature Compensation OPERATING: · Remove the protective cap. [. . . ] · Allow the reading to stabilize and using a small screwdriver adjust the calibration trimmer until the nominal ppm value of the solution is displayed. · Calibration is now complete. REPLACEMENT: BATTERY REPLACEMENT: When the TDS1 can not be switched on or the display fades, batteries have to be replaced. Pull out the batteries compartment and replace all four 1. 5V batteries, while paying attention to their polarity. Batteries should only be replaced in a non hazardous area using the battery types specified in this instruction manual. RECOMMENDATIONS FOR USERS: Before using this product, make sure that it is entirely suitable for the environment in which it is used. Operation of this instrument in residential areas could cause unacceptable interferences to radio and TV equipment. Any variation introduced by the user to the supplied equipment may degrade the instrument's EMC performance. To avoid electrical shocks, do not use this instrument when voltage at the measurement surface exceeds 24 VAC or 60 VDC. To avoid damages or burns, do not perform any measurement in microwave ovens. TDS1 TDS Meter with Automatic Temperature Compensation SPECIFICATIONS: RANGE 0 to 999 ppm (mg/L) RESOLUTION 1 ppm ACCURACY (@20°C/68°F) ±2% f. s. [. . . ] COMPENSATION Automatic from 5 to 50ºC (41 to 122ºF) ENVIRONMENT 0 to 50ºC (32 to 122ºF); 95% RH BATTERY TYPE 4 x 1. 5V alkaline BATTERIES LIFE approx. 150 hours DIMENSIONS 150 x 30 x 24 mm (5. 9 x 1. 2 x 0. 9") WEIGHT 85 g (3 oz. ) ACCESSORIES: HI 70080P 800 ppm calibration solution (25x20 mL sachets) HI 731326 Calibration screwdriver (20pcs) Visit our Internet Home Page: http://www. hannainst. com ISTRTDS1R3 01/2001 [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HANNA INSTRUMENTS TDS 1

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual HANNA INSTRUMENTS TDS 1 will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag