User manual HARMAN KARDON AVR 265

[. . . ] AVR 3650, AVR 365 AVR 2650, AVR 265 Audio/video receiver Owner's Manual ENGLISH AVR IntroductIon SupplIed AcceSSorIeS ImportAnt SAfety InformAtIon plAce the receIver front-pAnel controlS reAr-pAnel connectorS SyStem remote control functIonS Zone 2 remote control functIonS (Avr 3650/Avr 365 only) IntroductIon to home theAter typIcAl home theAter SyStem multIchAnnel AudIo Surround modeS plAce your SpeAkerS plAcIng the left, center And rIght SpeAkerS plAcIng the Surround SpeAkerS In A 5. 1-chAnnel SyStem plAcIng the Surround SpeAkerS In A 7. 1-chAnnel SyStem plAcIng front heIght SpeAkerS In A 7. 1-chAnnel SyStem plAcIng the Subwoofer typeS of home theAter SyStem connectIonS SpeAker connectIonS Subwoofer connectIonS Source devIce connectIonS vIdeo connectIonS rAdIo connectIonS network connector uSb port rS-232 connector mAkIng connectIonS connect your SpeAkerS connect your Subwoofer connect your tv or vIdeo dISplAy connect your AudIo And vIdeo Source devIceS connect the brIdge IIIp connect to your home network connect the rAdIo AntennAS InStAll A multIZone SyStem connect Ir equIpment (Avr 3650/Avr 365 only) connect the 12v trIgger output connect to Ac power 2 Table of Contents 3 3 3 3 4 6 8 10 12 12 12 12 13 13 13 13 13 13 14 14 14 14 15 16 16 16 16 17 17 17 17 18 20 20 20 21 22 23 23 Set up the remote control InStAll the bAtterIeS In the remote control progrAm the remote to control your Source devIceS And tv Set up the Avr turn on the Avr uSIng the on-Screen menu SyStem confIgure the Avr for your SpeAkerS Set up your SourceS Set up the network operAtIng your Avr controllIng the volume mutIng the Sound dolby volume ® 23 23 23 25 25 25 25 26 27 28 28 28 28 28 28 29 29 30 30 31 32 32 32 32 33 33 34 36 39 39 40 41 41 41 42 42 43 44 45 lIStenIng through heAdphoneS SelectIng A Source lIStenIng to fm And Am rAdIo lIStenIng to SIrIuS® SAtellIte rAdIo lIStenIng to medIA on A uSb devIce (Avr 3650/Avr 365) lIStenIng to An ipod/iphone devIce lIStenIng to Internet rAdIo lIStenIng to medIA vIA your home network SelectIng A Surround mode AudIo effectS vIdeo modeS AdvAnced functIonS AudIo proceSSIng And Surround Sound vIdeo proceSSIng mAnuAl SpeAker Setup lIStenIng In Zone 2 SyStem SettIngS SettIngS lock AdvAnced remote control progrAmmIng recordIng Sleep tImer reSettIng the remote proceSSor reSet troubleShootIng SpecIfIcAtIonS AppendIx AVR Introduction Thank you for choosing this Harman Kardon product!for more than fifty years, the harman kardon mission has been to share a passion for music and entertainment, using leading-edge technology to achieve premium performance. Sidney harman and bernard kardon invented the receiver, a single component designed to simplify home entertainment without compromising performance. over the years, harman kardon products have become easier to use, while offering more features and sounding better than ever. [. . . ] the current channel number and preset location will appear in the lower line of the Avr's front-panel message display. the song title, artist, channel name, channel category, channel number, preset position (if programmed) and signal-strength bars will all appear on the screen when a video display is in use. for traffic and weather channels, the current city's name will appear instead of the channel name. Preset SIRIUS channels you can store a total of 40 channels as presets. when the desired channel has been tuned, press the ok button, and two dashes will flash on the Avr's front-panel message display. use the number buttons to enter the desired preset number. to tune to a preset SIrIuS channel: · press the left/right buttons. · press the skip forward/skip backward transport control buttons. · press the menu button and scroll to the desired preset, then press the ok button. · enter the preset number using the number buttons. for presets 10 through 40, press 0 before the preset number. for example, to enter preset 21, press 0-2-1. use the up/down buttons or the remote's channel buttons to tune a station (or channel for SIrIuS radio), as displayed on the front panel and on-screen display. the Avr defaults to automatic tuning, meaning each press of the up/down buttons scans up or down the frequency band until a station with acceptable signal strength is found. to switch to manual tuning, in which each press of the up/down buttons steps through a single tuning frequency increment, press the remote's menu button. Select "mode, " and press the ok button to toggle between automatic and manual tuning modes. once you have tuned an fm station, toggling the mode setting also switches the radio between stereo and monaural reception. (mono reception may improve reception of weaker stations. ) Preset Stations you can store a total of 30 stations (Am and fm combined) as presets. when you want to save the currently tuned station as a preset, press the ok button, and two dashes will flash. use the number buttons to enter the desired preset number. to tune to a preset station: · press the left/right buttons. · press the skip forward/skip backward transport control buttons. · press the menu button and scroll to the desired preset, then press the ok button. [. . . ] ceA is a registered trademark of the consumer electronics Association. dlnA is a registered trademark of the digital living network Alliance. manufactured under license from dolby laboratories. dolby, the double-d symbol and pro logic are registered trademarks of dolby laboratories. [. . . ]