User manual HARMAN KARDON AVR 3550HD

[. . . ] AVR 3550HD AUDIO/VIDEO RECEIVER OWNER'S MANUAL SAFETY INFORMATION Important Safety Instructions Read these instructions. The A/V receiver's cabinet may be cleaned by gently wiping with a soft cotton or microfiber cloth. Do not use water or any liquid cleaners. Do not block any of the ventilation openings. [. . . ] Digital audio is not available to the multizone system, nor is any type of video. Press the Back/Exit Button, then return to the Setup Source line of the Main Menu to configure the next source. When you have finished, press the Back/Exit Button to clear the menus from view. You are now ready to begin enjoying your new receiver! Figure 56 ­ Adjust Lip Sync Change Name: Change the display name for your source, useful if your source's device type is different from the available source names. Select this line and use the // ¤ Buttons to scroll forward or reverse through the alphanumeric characters. When the desired character appears, use the > Button to move the cursor to the next position. Move the cursor again to leave a blank space. When you have finished, press the OK 34 34 OPERATION Now that you have installed your components and completed a basic configuration, you are ready to begin enjoying your home theater system. To restore normal audio, press the Mute Button again, or adjust the volume. Turning off the AVR will also end muting. Turning On the AVR 3550HD Flip the Main Power Switch on the rear panel up to the " On" position. The Power Indicator on the front panel will turn amber, indicating that the AVR is in Standby mode and is ready to be turned on. The Main Power Switch is normally left on. See Figure 46. Sleep Timer The sleep timer sets the AVR to play for up to 90 minutes and then turn off automatically. Press the Sleep Settings Button on the remote, and the time until turn-off will be displayed. Each additional press of the Sleep Button increases the play time by 10 minutes, up to a maximum of 90 minutes. The SLEEP OFF setting disables the sleep timer. There are several ways to trun on the AVR 3550HD: a) Press the Standby/On Switch on the front panel. b) Using the remote, press the AVR Power On Button or any of the Source Selectors. To turn the receiver off, press either the Standby/On Switch on the front panel or the AVR Power Off Button on the remote. Unless the receiver will not be used for an extended period of time, leave the Main Power Switch on. When the Main Power Switch is turned off, any settings you have programmed will be preserved for up to four weeks. IMPORTANT NOTE: If the PROTECT message ever appears in the Message Display, turn off the AVR and unplug it. If none is found, bring the unit to an authorized Harman Kardon service center for inspection and repair before using it again. Figure 58 ­ Sleep Settings Button When the sleep timer has been set, the front-panel display will automatically dim to half-brightness. [. . . ] Height measurement includes feet and chassis. All features, specifications and appearance are subject to change without notice. Harman Kardon and Logic 7 are trademarks of Harman International Industries, Incorporated, registered in the United States and/or other countries. EzSet/EQ, Designed to Entertain and The Bridge II logo are trademarks of Harman International Industries, Incorporated. [. . . ]