User manual HARMAN KARDON AVR 161S

[. . . ] Indb 2 26/05/15 2:29 pm AVR Introduction Thank you for choosing this Harman Kardon product!For more than fifty years, the Harman Kardon mission has been to share a passion for music and entertainment, using leading-edge technology to achieve premium performance. Sidney Harman and Bernard Kardon invented the receiver, a single component designed to simplify home entertainment without compromising performance. Over the years, Harman Kardon products have become easier to use, while offering more features and sounding better than ever. [. . . ] Additional Tips for Troubleshooting HDMI Connections • Turn off all devices (including the TV, the AVR and any source components). € Unplug the HDMI cables, starting with the cable between the AVR and the TV, and continuing with the cables between the AVR and each source device. € Carefully reconnect the cables from the source devices to the AVR. Connect the cable from the AVR to the TV last. € Turn on the devices in this order: TV, AVR, source devices. NOTE: Depending upon the particular components involved, the complexity of the required communication between HDMI components may cause delays of up to a minute in the completion of some actions, such as input switching or switching between SD and HD channels. Controlling the Volume Adjust the volume either by turning the front-panel Volume knob (clockwise to increase volume or counterclockwise to decrease volume) or by pressing the Volume Up/Down buttons on the remote. The volume is displayed as a negative number of decibels (dB) below the 0dB reference point (–80dB – +10dB). 0dB is the maximum recommended volume for your AVR. Although it’s possible to turn the volume to a higher level, doing so may damage your hearing and your speakers. For certain more dynamic audio materials, even 0dB may be too high, allowing for damage to equipment. Use caution with regard to volume levels. To change the volume level display from the default decibel scale to a 0-to-90 scale, adjust the Volume Units setting in the System Settings menu, as described in System Settings, on page 34. Selecting a Surround Mode Selecting a surround mode can be as simple or sophisticated as your individual system and tastes. Feel free to experiment, and you may find a few favorites for certain sources or program types. You can find more detailed information on surround modes in Audio Processing and Surround Sound, on page 29. Muting the Sound To mute all speakers and the headphones, press the Mute button on the remote. Any recording in progress will not be affected. The MUTE message will appear in the display as a reminder. To restore the sound, press the Mute button again, or adjust the volume. Listening Through Headphones Plug the 1/4-inch stereo plug on a pair of headphones into the front-panel Phones jack for private listening. The default HARMAN Headphone mode uses virtual surround processing to emulate the sound of a 5. [. . . ] For information on how to set up and use Spotify Connect please visit www. Com/connect Licenses The Spotify Software is subject to third party licenses found here : www. Spotify Connect feature may not be used in countries where Spotify service is not available. Impianto home theater tipico Un impianto home theater generalmente include un ricevitore audio/video, che controlla il sistema e fornisce amplificazione ai diffusori, un lettore di dischi, un componente sorgente per le trasmissioni televisive (scatola di interconnessione, a disco satellitare, sintonizzatore HDTV o antenna collegata al TV), un TV o un display video e più diffusori. [. . . ]