User manual HARMAN KARDON ST5

[. . . ] A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. [. . . ] Plasma and CRT monitors may suffer from "burn-in" when the same image, such as the horizontal or vertical bars, is left on screen for a long period of time. Adjust the picture so that it fills the display's screen. Highlight this setting and press the OK Button. Each press of the KL Buttons changes the setting. Press the OK Button when the desired setting appears. · Auto Fit: The AVR automatically adjusts the image, as required, to fit the display's capabilities. · Height Fit: Adjusts the image to eliminate any bars above or below it. ENGLISH · Width Fit: Adjusts the image to eliminate any bars on the sides. Bars may remain above and below the image. · Zoom 1x: Displays the image as received from the source. If the image is in the 4:3 aspect ratio, on widescreen displays pillarbox format may be used. Widescreen (16:9) images are displayed on a full-screen (4:3) device in letterbox format. Black bars may appear above and below the image. When displaying full-screen images on a widescreen device, black or gray bars may appear to the left and right of the image (pillarboxing). Advanced Video Settings: Press the N or OK Button to display the Advanced Video Modes submenu (see Figure 36). This submenu is not accessible when the video processor (Video Mode setting) is turned off. Figure 36 ­ Advanced Video Modes Menu 9 ADVANCED FuNCTIONS Noise Reduction: Adjust this setting to Low, Medium or High to filter out signal noise, or turn it off. MPEG Noise Reduction: This setting is designed to address two specific types of video distortion, mosquito noise and blocking artifacts. If you see haziness or shimmering around the edges of objects or the scrolling credits in a film, or if the image appears to "pixellate" into blocks, change the MPEG Noise Reduction setting from Off to Low, Medium or High. Cross Color Suppressor: Turn this setting on to remove cross color artifacts, which can occur when high-frequency luminance (brightness) signals are misinterpreted as chroma (color) signals, causing unwanted flickering, flashing colors or rainbow patterns. This setting is not available with HDMI sources, or when no video signal is present. Black Level: This setting is only effective when used with the Composite Video Output. Turn it on for a full black-level setting that provides the full dynamic range of black as presented on most DVDs. When turned off, the setting complies with standards for video with "setup", and may be more appropriate when your video display has limited video processing capability. [. . . ] Ch Music AVR Volume + AVR Volume ­ AVR Mute Channel Up Channel Down Game AVR Power On AVR Power Off Play Stop Input Sel Input Sel Input Sel Radio Input Sel Input Sel Input Sel Input Sel Audio Effects Video Modes Surround Modes 1 2 3 4 5 6 7 8 9 Enter 0 Activity Clear Start Up Left Select Right Light Down DVD Menu 2 CD AVR Power On AVR Power Off Power On Power Off Input Sel Input Sel Input Sel Radio Input Sel Input Sel Input Sel Input Sel Audio Effects Video Modes Surround Modes 1 2 3 4 5 6 7 8 9 0 Activity HDTV AVR Power On AVR Power Off Power On Power Off Input Sel Input Sel Input Sel Radio Input Sel Input Sel Input Sel Input Sel Audio Effects Video Modes Surround Modes 1 2 3 4 5 6 7 8 9 Prev. Ch 0 Activity Exit/Cancel Menu Up Left Enter Right Light Down OSD Caption Fav. Ch MTS Aspect AVR Volume + AVR Volume ­ AVR Mute Channel Up Channel Down Back Pause Replay Rew G Play B FF H Record Stop AVR Sel and Setup Info Settings Sleep Sleep Learn AUX PVD AVR Power On AVR Power Off Power On Power Off Input Sel Input Sel Input Sel Radio Input Sel Input Sel Input Sel Input Sel Audio Effects Video Modes Surround Modes 1 2 3 4 5 6 7 8 9 Instant Replay 0 Activity Exit Menu Up Left Setup Right Light Down AV Mark Repeat Jump Up Jump Down AVR Volume + AVR Volume ­ AVR Mute Channel Up Channel Down Last Clip Pause Next Clip Rew G Play B FF H Record Stop AVR Sel and Setup Info Settings Sleep Sleep Learn TiVo AVR Power On AVR Power Off Power On Power Off Input Sel Input Sel Input Sel Radio Input Sel Input Sel Input Sel Input Sel Audio Effects Video Modes Surround Modes 1 2 3 4 5 6 7 8 9 Enter/Last 0 Activity Exit Menu Up Left Select Right Light Down TiVo Window Live TV Slow Skip AVR Volume + AVR Volume ­ AVR Mute Channel Up Channel Down Thumb Down Pause Thumb Up Rew G Play B FF H Record Stop AVR Sel and Setup Info Settings Sleep Sleep Learn VCR AVR Power On AVR Power Off Power On Power Off Input Sel Input Sel Input Sel Radio Input Sel Input Sel Input Sel Input Sel Audio Effects Video Modes Surround Modes 1 2 3 4 5 6 7 8 9 0 Activity Cancel Menu Up Left Enter Right Light Down OSD Light 0 K AVR Volume + AVR Volume ­ AVR Mute Channel Up Channel Down Previous Pause Next Step Rew G Play B FF H Record Stop AVR Sel and Setup Info Settings Sleep Zone Select Learn AVR Volume + AVR Volume ­ AVR Mute Page Up Page Down Previous Pause Next Rew G Play B FF H Stop AVR Sel and Setup Info Settings Sleep Zone Select Learn AVR Sel and Setup Info Settings Sleep Zone Select Learn AVR Sel and Setup Info Settings Sleep Learn X AVR Volume + AVR Volume ­ AVR Mute Scan Up Scan Down Slow Down Pause Slow Up Prev. Play B Next Subtitle Stop AVR Sel and Setup Info Settings Sleep Learn Open/Close Random Play Repeat Intro Scan AVR Volume + AVR Volume ­ AVR Mute (+10) Disc Skip Skip Down Pause Skip Up R. [. . . ]