User manual HARTAN SKY

[. . . ] SKY Suitable from 6 months, up to 15kg Under 6 months only in connection with an appropriate carrycot. SKY XL Suitable from 0 to 3 years, up to 15kg Folding carrycot in conformity with DIN EN 1466:2008 Base length: 76, 5 x 33, 5cm These models may not be used while jogging or skating. Handle Handlebar catch Twist grip for telescopic adjustment Wheel retention Lock-type-swivel wheels Swivel wheel holder Parking brake Adjustable suspension system Bolt for leg latch Climatic zone Safety bar adjustment Hood bar and safety bar removal Tilt-adjustable backrest Safety belts Adjustable footrest Footrest extension Automatic lock for upper section Fall-out protection Sun visor Chassis unlatching Carrying-bar lock Canopy attachment Carrying bar Washable internal lining Silently adjustable hood Sun canopy Congratulations on your purchase You want your baby to feel safe and secure, that's why you have purchased a high-quality product. Products are manufactured with the greatest possible care and monitored constantly by rigorous quality control assuring that your pram will provide life-long satisfaction. [. . . ] When inserting it, make sure the safety bar locks into place correctly and be careful not to pinch any of the fabric parts. By pressing the buttons 11, the safety bar position can be changed. The hood bar of the stroller and the safety bar are not suitable for carrying the pram. Adjusting the backrest By lifting the back clip 13 at the rear, the backrest can be adjusted from sitting to reclining position in close steps. When adjusting the backrest, take care that no movable parts jam the baby's limbs or fingers, etc. Finally, make sure the backrest has reengaged properly. As an additional protection preventing the baby from falling out of the carriage, secure the hood to the metal back. To do this, join the grommets 18 to their respective turn-lock fasteners, and the hook lock 19 to the metal ring on the back plate as well. Adjusting the footrest First, press the two buttons 15, located at the right and left side respectively, to fold the footrest down. then raise the footrest to the required position. A number of settings up to the horizontal position can be selected. To prolong the footrest, press the two buttons 16, and pull it out. In case the carrycot is attached to the frame, the footrest should always be in horizontal position, as an additional protection preventing it from slipping out. Always use the crotch belt D in combination with the waist strap E. Remember to tighten the seat belt when it slacks, which is done by means of the adjuster buckle. For reasons of safety, pass the belt buckle through the shackle F when closing the safety belt. As an additional protection preventing babies from slipping out, pass the crotch belt D through the loop G on the seat. Automatic lock for upper section 17 Place the stroller unit or carrycot upon the chassis in a way that the openings of the handles fit the locking studs. The two locks engage by pressing lightly, which is indicated by a click sound. Check by lifting the carriage top to make sure the two locks are engaged securely. To remove the carriage tops, depress the two red lock levers in the respective handle at the same time, and take off the carriage tops. To fold the bar back, depress the Aluminium braces red safety button 22 and place the bar back, which can be done in several steps. [. . . ] Do not use high-pressure cleaners when cleaning your carriage, due to risk of damaging the ball bearings of the wheels (greased) and other functional parts (grinding and creaking noise). Wheels: When using pneumatic wheels, make sure they have got enough air in the tire. Specified tire inflation pressure should be between 1. Whenever possible, do not park carriages using pneumatic tired wheels for a longer period of time on light PVC or linoleum as rubber tires may rub off on the floor covering. [. . . ]