User manual HASBRO CURE THE

[. . . ] Remove batteries if product is not to be played with for a long time. Do not short circuit the supply terminals. Should this product cause, or be affected by, local electrical interference, move it away from other electrical equipment. Reset (press the reset button on the bottom of the phone or remove and reinsert batteries) if necessary. [. . . ] Eavesdrop Function: If someone else picks up another phone in your house while you're on the phone, you will hear Bart say "Heh, Heh, Heh" in a very sneaky voice to alert you that someone is listening in on your conversation. When the eavesdropper hangs up you will hear Bart say "I'm outta here!" to alert you that you are no longer being eavesdropped on. Flash/ Call Waiting Function: Press the Flash/Call Waiting button to pick up an incoming phone call while you are using the phone. Press this button again to return to your first phone call. Redial Function: Press the Redial button to redial the last number dialed. CONSUMER INFORMATION a) This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company. b) An applicable certification jacks Universal Service Order Codes (USOC) for the equipment is provided (i. e. , RJ11C) in the packaging with each piece of approved terminal equipment. c) A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. k) This equipment is hearing aid compatible. NOTICE: According to telephone company reports, AC electrical surges, typically resulting from lightning strikes, are very destructive to telephone equipment connected to AC power sources. To minimize damage from these types of surges, a surge arrestor is recommended. FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and the receiver. - Consult the dealer or an experienced radio/TV technician for help. - Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. IMPORTANT SAFETY INSTRUCTIONS BEFORE USING YOUR TELEPHONE EQUIPMENT, BASIC SAFETY PRECAUTION SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURY TO PERSONS, INCLUDING THE FOLLOWING: 1. Follow all warnings and instructions marked on the product. [. . . ] Opening or removing covers may expose you to dangerous voltage or other risks. Incorrect reassembly can cause electric shock when the appliance is subsequently used. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: · When the phone cord or plug is damaged or frayed. · If liquid has been spilled onto the product. [. . . ]