User manual HASBRO JUNIOR COMBINATION BOARD

[. . . ] 6, 816, 141 CAUTION To prevent electric shock and blade exposure, do not use this polarized AC plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted. • Operate the TV only on 110-240 V AC (U. S. A. /Canada 120 V AC) • Some people may experience discomfort (such as eye strain, fatigue, or nausea) while watching 3D video images or playing stereoscopic 3D games. Sony recommends that all viewers take regular breaks while watching 3D video images or playing stereoscopic 3D games. The length and frequency of necessary breaks will vary from person to person. [. . . ] An alternative way to secure the TV is with an optional Sony Support Belt Kit. The Sony Support Belt Kit is available as an optional accessory, depending on your TV model. XBR-65HX950 Recommended Measures to Secure the TV Consider the following measures when securing your TV to a Stand (not supplied). M6 machine screw (not supplied) 1 Secure the Stand for the TV. Make sure the Stand can adequately support the weight of the TV. Use two angle braces (not supplied) to secure the stand. For each angle brace use the appropriate hardware to: • Attach one side of the angle brace to the wall stud. • Attach the other side to the Stand. Rope or chain (not supplied) Screw hole on the Table-Top Stand Screw (not supplied) 16 XBR-65HX950/55HX950/KDL-55HX850/46HX850 4-411-986-12(1) D:\TV's JOB\HASBRO TV\SY120099_B6 (Rev-2)\Group B6 (Rev2)\4411986121\4411986121\US03STU. fm JUNIOR COMBINATION BOARD ~ Contact Sony Customer Support to obtain the optional Support Belt Kit by providing your TV model name. • For United States call: 1-800-488-7669 or visit: http://www. sony. com/accessories • For Canada call: 1-877-899-7669 3 M4 machine screw (not supplied) Rope or chain (not supplied) Screw hole on the Table-Top Stand Screw (not supplied) Anchor the TV to the Wall. Anchor the TV to the wall by using bolts, wall anchor and chain (or rope). Anchor bolts (M6) (not supplied) Getting Started Wallmount holes Rope or chain (not supplied) Wall-anchor (not supplied) KDL-55/46HX850 M4 machine screw (not supplied) Screw hole on the Table-Top Stand Rope or chain (not supplied) ~ • Your TV is shipped with screws attached to the rear of the TV depending on the TV model. (They are fastened in the screw holes for wall mounting. ) Be sure to remove the upper two screws prior to anchoring the TV on a wall. • Securing the TV to the stand without securing the TV and the stand to the wall provides minimum protection against the TV toppling over. Then, select the network name (SSID) you want to connect. If you cannot find the required network name, select [Manual Entry] and press to enter network name. • Use the optional USB Wireless LAN Adapter to connect with your wireless router (or access point) at 5GHz. Insert USB Wireless LAN Adapter and set Standby for Wi-Fi Direct to Off. Press HOME, then select Settings t Network t Standby for Wi-Fi Direct t Off. • To set Network Setup later, press HOME, then select Settings t Network t Network Setup. 3 Press F/f/G/g to select an item, then press . Follow the instructions on the screen. 20 XBR-65HX950/55HX950/KDL-55HX850/46HX850 4-411-986-12(1) D:\TV's JOB\HASBRO TV\SY120099_B6 (Rev-2)\Group B6 (Rev2)\4411986121\4411986121\US03STU. fm Using a Wall-Mount Bracket Your TV can be mounted on a wall using a Wall-Mount Bracket (not supplied) out of the box as packaged. If the Table-Top Stand is attached to the TV, the TV may require detaching the Table-Top Stand; see page 11 (Detaching the Table-Top Stand from the TV). Prepare the TV for the Wall-Mount Bracket before making cable connections. For product protection and safety reasons, Sony strongly recommends that you use the Wall-Mount Bracket designed for your TV and the installation should be performed by a Sony dealer or licensed contractor. • See page 37 (Compatible optional accessories information). [. . . ] • Never spray water or detergent directly on the TV set. It may drip to the bottom of the screen or exterior parts and enter the TV set, and may cause damage to the TV set. • Never use strong solvents such as a thinner, alcohol or benzine for cleaning. • Do not plug in the TV into the wall outlet until the moisture from cleaning has evaporated. [. . . ]