User manual HASBRO MANSION OF HAPPINESS GAME

[. . . ] Changes to the specifications and features in this manual may be made by HASBRO without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without HASBRO's prior written permission. „„ In order to assist in the use of this product, carefully read the User's Manual. „„ For product-related information, check on our website at: http://www. gigabyte. com Identifying Your Motherboard Revision The revision number on your motherboard looks like this: "REV: X. X. " For example, "REV: 1. 0" means the revision of the motherboard is 1. 0. [. . . ] Profile2 (Note) Uses Profile 2 settings.  Allows you to set the system memory multiplier. Auto sets memory multiplier according to memory SPD data. (Default: Auto) This value is automatically adjusted according to the BCLK/PCIe Clock Control and System Memory Multiplier settings. && Memory Frequency (MHz) `` Advanced Memory Settings && AMD Memory Profile (A. M. P. ) (Note), System Memory Multiplier (SPD), Memory Frequency(MHz) && DRAM Timing Selectable The settings above are synchronous to those under the same items on the Advanced Frequency Settings menu. Quick and Expert allows the memory timing settings below to be configurable. Options are: Auto (default), Quick, Expert. When using a non-AMP memory module or AMD Memory Profile (A. M. P. ) is set to Disabled, this item will display as 1. 50V. When AMD Memory Profile (A. M. P. ) is set to Profile1 or Profile2, this item will display the value based on the SPD data on the AMP memory. The value displayed here is dependent on the CPU being used. && Profile DDR Voltage && Profile VTT Voltage && Rank Interleaving Enables or disables memory rank interleaving. Enabled allows the system to simultaneously access different ranks of the memory to increase memory performance and stability. (Default: Enabled) This item is present only when you install a memory module that supports this feature. (Default) Silent  Allows the CPU fan to run at slow speeds. Manual Allows you to control the CPU fan speed under the Slope PWM item.  Disabled Allows the CPU fan to run at full speeds.  Allows you to control the CPU fan speed. This item is configurable only when CPU Fan Speed Control is set to Manual. Options are: 0. 75 PWM value /oC ~ 2. 50 PWM value /oC. && CPU Fan Control Mode && CPU Fan Speed Control && Slope PWM && 1st/2nd/3rd System Fan Speed Control Allows you to determine whether to enable the system fan speed control function for the system fan connected to the SYS_FAN1~3 connector and adjust the fan speed. Normal   Allows the system fan to run at different speeds according to the system temperature. You can adjust the fan speed with EasyTune based on your system requirements. (Default) Silent  Allows the system fan to run at slow speeds. Manual Allows you to control the system fan speed under the Slope PWM item.  Disabled Allows the system fan to run at full speeds. [. . . ] To copy the RAID/AHCI driver for Windows XP, copy all files in the \BootDrv\Hxp folder in the motherboard driver disk to your floppy disk. To install Windows 7/Vista, you also need to install the SATA RAID/AHCI driver during the OS installation. To copy the RAID/AHCI driver for Windows 7, copy the whole Hw7 folder under the BootDrv folder in the motherboard driver disk to a USB flash drive. Installing the SATA RAID/AHCI Driver and Operating System A. Installing Windows XP Restart your system to boot from the Windows XP setup disk and press <F6> as soon as you see the message "Press F6 if you need to install a 3rd party SCSI or RAID driver. " Insert the floppy disk containing the SATA RAID/AHCI driver. [. . . ]